UE-403162NA - Panasonic Fax Service Manual Supplement (repair manual). Page 32

32

Use the following procedure to change the function parameters.

The following buttons provide these functions in the test mode:
"START" : The new setting value is stored in the machine.
"\/"           : Scroll the function parameter number down.
"/\"           : Scroll the function parameter number up.

1

Standby

2

Press “FUNCTION” and then “7”.

3

Press “MONITOR” four times, then press “*”.

4

Press “1”.

5

Enter the Function Parameter Number.
Ex: Changing the "DC LOOP" -- Enter "009" and press [SET].

6

Press “START”.

7

Enter the new setting value.
Ex: Enter "2" for On.

8

Press “START”. The new value will be stored and the next parameter will be 
displayed.

9

Repeat steps 4 through 7 to change other Function Parameters or Press 
“STOP” twice to return to standby.

JUL-12-1999  15:00

00%

SET MODE        (1-6)

ENTER NO. OR

SERVICE MODE

ENTER NO. OR

PARAMETER (000-199)

ENTER PARAMETER #_

   PARAMETER   #009

DC LOOP?    

DC LOOP:Off

1:OFF 2:ON

DC LOOP:On

1:OFF 2:ON

   PARAMETER   #010

TX LEVEL?

JUL-12-1999  15:00

00%