KX-FT932RU-B, KX-FT932CA-B, KX-FT932UA-B, KX-FT934RU-B, KX-FT934CA-B, KX-FT934UA-B - Panasonic Fax Service Manual (repair manual). Page 14

Read Panasonic KX-FT932RU-B / KX-FT932CA-B / KX-FT932UA-B / KX-FT934RU-B / KX-FT934CA-B / KX-FT934UA-B Service Manual online

14
KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B
6.3.
Control Section
6.3.1.
ASIC (IC1)
This custom IC is used for the general FAX operations.
1. CPU:
This model uses a Z80 equivalent to the CPU operating
at 12 MHz. Most of the peripheral functions are performed
by custom-designed LSIs. Therefore, the CPU only works
for processing the results.
2. RTC:
Real Time Clock
3. DECODER:
Decodes the address.
4. ROM/RAM I/F:
Controls the SELECT signal of ROM or RAM and the
bank switching.
5. CIS I/F:
Controls the document reading.
6. IMAGE DATA RAM:
This memory is programmed into the ASIC and uses 8
KB for the image processing. 
7. THERMAL HEAD I/F:
Transmits the recorded data to the thermal head.
8. MOTOR I/F:
Controls the transmission motor which feeds the docu-
ment.
Controls the receiving motor which feeds the recording
paper.
9. OPERATION PANEL I/F:
Serial interface with Operation Panel.
10. I/O PORT:
I/O Port Interface.
11. ANALOGUE UNIT:
Electronic volume for the monitor.
Sends beep tones, etc.
Note*:
This memory is incorporated into the ASIC (IC1) and used for the image processing.
Descriptions of Pin Distribution (IC1)
NO.
SIGNAL
I/O
POWER SUPPLIED 
VOLTAGE
DESCRIPTION
1
VSSA
GND
POWER SOURCE (ANALOG GND)
2
VDDA 3.3
3.3V
POWER SOURCE (ANALOG +3.3V)
3
AIN1
A
3.3V
CIS IMAGE SIGNAL INPUT (ATN1)
4
AIN2
A
3.3V
THERMISTOR TEMPERATURE WATCH INPUT
5
AIN3
A
3.3V
LINE VOLTAGE DETECTION SIGNAL INPUT (DCIN)
6
AMON
A
3.3V
ANALOG SIGNAL MONITOR TERMINAL
7
VSS
GND
POWER SOURCE (GND)
8
X32OUT
O
3.3V/BATT
RTC (32.768KHz) CONNECTION
9
X32IN
I
3.3V/BATT
RTC (32.768KHz) CONNECTION
10
VDD (3.3V / B)
-----
POWER SOURCE (+3.3V/LITHIUM BATTERY)
11
XBACEN
I
3.3V/BATT
BACKUP ENABLE
12
XRAMCS
O
3.3V/BATT
XRAMCS
13
VDD (3.3V / B)
-----
POWER SOURCE(+3.3V / LITHIUM BATTERY)
14
VDD (2.5V/B)
-----
POWER SOURCE (+2.5V / LITHIUM BATTERY)
15
FTG
O
3.3V
SH SIGNAL OUTPUT FOR CIS (FTG)
16
F1
O
3.3V
01 SIGNAL OUTPUT FOR CIS (F1)
17
F2/OP
O
3.3V
OUTPUT PORT (HEADON)
18
FR/OP
O
3.3V
OUTPUT PORT (MDMRST)
19
CPC
I
3.3V
INPUT PORT (CPC)
20
RVN
I
3.3V
INPUT PORT (PAPER)
21
IRDATXD/IOP
I
3.3V
INPUT PORT (JAM)
22
IRDARXD/IOP80
O
3.3V
OUTPUT PORT (HSTX MUTE)
23
TXD/IOP
I
3.3V
INPUT PORT (BELL)
24
RXD/IOP
I/O
3.3V
PORT (TELRXEN)
25
XRTS/IOP
I
3.3V
INPUT PORT (PSHORT)
26
XCTS/IOP
I/O
3.3V
PORT (MDMTXEN)
27
VDD (2.5V)
-----
POWER SOURCE (+2.5V)
28
TONE1
A
3.3V
TONE OUTPUT
29
TONE2
A
3.3V
TONE OUTPUT
30
VOLUREF
A
3.3V
ANALOG REF VOLTAGE
31
VOLUOUT
A
3.3V
VOLUME OUTPUT
32
VOLUIN
A
3.3V
VOLUME INPUT
33
XNMI
I
3.3V
HIGH FIXED
34
FMEMDO/IOP
O
3.3V
OUTPUT PORT (LED ON)
35
VDD (3.3V)
-----
POWER SOURCE (+3.3V)
36
VSS
GND
POWER SOURCE (GND)
37
VSS
GND
POWER SOURCE (GND)
Page of 127
Display

Click on the first or last page to see other KX-FT932RU-B / KX-FT932CA-B / KX-FT932UA-B / KX-FT934RU-B / KX-FT934CA-B / KX-FT934UA-B service manuals if exist.