Read Panasonic KX-FP320E / KX-FM330E Service Manual Simplified online
7
(Model KX-FP320E/KX-FM330E)
KX-FP320E/KX-FM330E
3. Receive problem (Change from original page 47)
Confirm the following before starting troubleshooting.
Is the recording paper installed properly? Refer to Remarks.
Is the recording paper installed properly? Refer to Remarks.
Note:
“596: Transmit level set” represents a service code. (Refer to 2.4.4. Service Function Table.)
Refer to the Service Function Table.
Refer to the Service Function Table.
RX problem
Can something be RX?
Re-record the answering
machine OGM in a quiet room.
(The OGM shouldn?t have back
ground noise.)
machine OGM in a quiet room.
(The OGM shouldn?t have back
ground noise.)
Can't RX on international call
or long distance call?
or long distance call?
Can not RX from Ricoh ma-
chines which have the G1,G2
and G3 modes.
chines which have the G1,G2
and G3 modes.
Which mode?
Change the "718: Receive
speed select" to 12000, 9600,
7200, 4800 or 2400 bps.
speed select" to 12000, 9600,
7200, 4800 or 2400 bps.
Ask the sender to change:
• Increase the "596: Transmit
• Increase the "596: Transmit
level set".
Increase the "593: Time
between CED & 300 bps" to
some value.
between CED & 300 bps" to
some value.
Ask the sender to change:
• Increase the TX level.
• Change the TX equalizer.
• Increase the TX level.
• Change the TX equalizer.
Are there many errors on the image?
Decrease the "596:Transmit
level set" from -11 dBm to
-13 dBm or some value.
level set" from -11 dBm to
-13 dBm or some value.
Error code No. 68 (Echo)?
EXT. TAM mode
(When connected to an answering machine during EXT. TAM.)
NO: Looks OK.
OK
Is the EXT TEL off-hook be-
fore the ringing stops?
TEL mode
YES
NO
YES
NO
NO
YES
YES
YES
NO
NO
YES
YES
FAX mode
TEL/FAX mode
Ask the sender to change:
• Send manually.
• Send manually.
Ask the sender to change:
• Send manually using " ".
• Send manually using " ".
Increase the "595: RX error
limit value" to some value.
limit value" to some value.
Is the FAX ring count (#07) 2, 3 or 4?
NO
Change the FAX ring count to 1.
Change the "718:Receive
speed select" to 12000, 9600,
7200, 4800 or 2400 bps.
speed select" to 12000, 9600,
7200, 4800 or 2400 bps.
Note: "596: Transmit level set"
represents a service code.
(Refer to 2.4.4. Service Function
Table.)
Refer to the Service Function
Table.
(Refer to 2.4.4. Service Function
Table.)
Refer to the Service Function
Table.
Click on the first or last page to see other KX-FP320E / KX-FM330E service manuals if exist.