Read Panasonic KX-FM131CE Service Manual Simplified online
Code
Function
Set Value
Effective Range
Default
Remarks
593
Time between CED and 300bps
1: 75 msec 2:500
msec 3:1 sec
msec 3:1 sec
1~3
1
See the Symptom/Countermeasure
Table for long distance and
international calls in 2.3.3.3.1.
Defective facsimile section.
Table for long distance and
international calls in 2.3.3.3.1.
Defective facsimile section.
594
Overseas DIS detection select
1:detects at the 1st
time 2:detects at the
2nd time
time 2:detects at the
2nd time
1, 2
1
See the Symptom/Countermeasure
Table for long distance and
international calls in 2.3.3.3.1.
Defective facsimile section.
Table for long distance and
international calls in 2.3.3.3.1.
Defective facsimile section.
595
Receive error limit value set
X Number of times
001~999
100
Sets the number of acceptable
error lines when the FAX
reconstructs the received data.
error lines when the FAX
reconstructs the received data.
596
Transmit level set
X dBm
- 15~00
10
Selects the FAX transmission level.
598
Receiving sensitivity
43= -43 dBm
20~48
43
Used when there is an error
problem. See the
Symptom/Countermeasure Table
for long distance and international
calls in 2.3.3.3.1. Defective
facsimile section.
problem. See the
Symptom/Countermeasure Table
for long distance and international
calls in 2.3.3.3.1. Defective
facsimile section.
599
ECM frame size
1:256 2:64
1, 2
1
602
Warning LIST Printing
1:ON 2:OFF
1, 2
1
Used to print a caution list when
setting the TEL/FAX mode and ring
detection.
setting the TEL/FAX mode and ring
detection.
624
AT ring time out
1:3sec 2:5sec
1, 2
1
717
Transmit speed selection
1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1~6
1
Adjusts the speed to start training
during FAX transmission.
during FAX transmission.
718
Receive speed selection
1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1~6
1
Adjusts the speed to start training
during FAX reception.
during FAX reception.
719
Ringer off in TEL/FAX mode
1:ON 2:OFF
1, 2
1
Sets the ringer switch off when a
call is received in the TEL/FAX
mode.
call is received in the TEL/FAX
mode.
721
Pause tone detect
1:ON 2:OFF
1, 2
1
Selects the tone detection for
pause in dialing.
pause in dialing.
722
Redial tone detect
1:ON 2:OFF
1, 2
1
Selects the tone detection mode
after redialing.
after redialing.
724
PC-FAX ATD busy tone detect
1:ON 2:OFF
1, 2
1
731
CPC mode
1:A 2:B 3:OFF
1~3
1
Sets the CPC signal detection
mode from the converter
mode from the converter
732
AUTO disconnect cancel time
1:350 ms 2:1.8 sec
3:OFF
3:OFF
1~3
1
"Sets to "2" when the auto
disconnect circuit operates and
cuts the line."
disconnect circuit operates and
cuts the line."
745
Power ON film feed
1:ON 2:OFF
1, 2
1
When the power is turned on, the
film is wound to take up any slack.
film is wound to take up any slack.
763
CNG detect time for friendly
reception
reception
1:10 sec 2:20 sec
3:30 sec
3:30 sec
1~3
3
Selects the CNG detection tome of
friendly reception.
friendly reception.
771
T1 timer
1:35 sec 2:60 sec
1, 2
1
Sets a higher value when the
response from the other party
needs more time during FAX
transmission.
response from the other party
needs more time during FAX
transmission.
774
T4 timer
× 100 msc
00~99
00
Use this function when delay
occurs on the line and
communication (ex. mobile comm)
does not work well.
occurs on the line and
communication (ex. mobile comm)
does not work well.
775
Monitoring of message transfer
1:ON 2:OFF
1, 2
2
If set to ON a message can be
monitored from this unit’s SP-
PHONE when transferring a
message.
monitored from this unit’s SP-
PHONE when transferring a
message.
784
Voice prompt test
You can hear the voice prompt
from speaker after pressing
"START" key.
from speaker after pressing
"START" key.
815
Sensor & Vox check
See 2.5. TEST FUNCTIONS.
841
Digital SP-phone check
See 2.3.3.5.1. Digital
Speakerphone.
Speakerphone.
852
Print test pattern
See 2.5. TEST FUNCTIONS.
853
Top margin
1~9
--------
854
Left margin
1~8
--------
861
A4 size set
1:ON 2:OFF
1, 2
1
Used only at the factory.
870
Serial port self test (KX-FM131 only)
See 2.5. TEST FUNCTIONS.
14
KX-FM131CE
Click on the first or last page to see other KX-FM131CE service manuals if exist.