Read Panasonic Q-MECHANISM Service Manual online
file:///C|/Documents%20and%20Settings/Someone/My%20Documents/202/s0302000000.html
14
Chassis Radon
Fig. D14
1) Remove a washer.
15
Boat Radon
Fig. D15
1) Remove Boat radon.
16
Drive Gear
Fig. D16
1) Remove Drive Gear and a White Waher underneath.
17
Capstan Holder & Capstan Motor
Fig. D17-1
1) Remove 2 screws and take Capstan Holder out.
* It is not necessary to remove 2 screws for New Capstan Holder.
Because it shapes screw.
Because it shapes screw.
Fig. D17-2
2) Remove 3 screws and take Capstan Motor out downword.
18
Loading Motor unit & Mechanism Interface Flex.
Fig. D18-1
1) Remove 2 screws and take Loading Motor Unit out.
Fig. D18-2
2) Remove 4 screws and dissolder at Mode Sw.
*19 Mode Switch , Deceleration Gears & Tension Plate.
Fig. D19
1) Take Mode Sw out.
2) Remove a washer and take Deceleration Gear (A) out.
3) Take Deceleration Gear (B) out.
4) Remove 2 washers and take Tension Plate.
2) Remove a washer and take Deceleration Gear (A) out.
3) Take Deceleration Gear (B) out.
4) Remove 2 washers and take Tension Plate.
*20 T4 Guide , Eject Lever , Pulley Cover & Pulley.
Fig. D20-1
1) Remove a screw and take T4 Guide out.
Fig. D20-2
2) Remove a washer and take Eject Lever out.
Fig. D20-3
3) Remove 2 screw and take Pulley Cover out.
4) Take Pulley out.
*21 S3 Base U.
Fig. D21
1) Remove a screw for S3 adjustment and take S3 Base U.
* 1) Procedure 2 for H.Amp Unit is applied only Q1 & Q2 / mechanism. 2) Procedure 19 - 21 can be
changed in order.
changed in order.
Fig. D1-1
file:///C|/Documents%20and%20Settings/Someone/My%20Documents/202/s0302000000.html (2 of 23) [02.10.2002 13:24:22]
Click on the first or last page to see other Q-MECHANISM service manuals if exist.