Read Panasonic Q-MECHANISM Service Manual online
file:///C|/Documents%20and%20Settings/Someone/My%20Documents/202/s0302000000.html
3.2 DISASSEMBLY PROCEDURE
TOP
PREVIOUS
NEXT
No.
Item
Fig.
Procedure
1
Cassette Up Unit.
Fig. D1-1
1) Remove 3 screws. (Q1 &2 have 4 screws)
Fig. D1-2
2) Take coupling portion off from both S &T sides.
*2
H Amp Unit./(Only Q1 & Q2)
Fig. D2-1
1) Remove a screw from Shield case.
Fig. D2-2
2) Take Cylinder Flex. From connector.
Fig. D2-3
3) Remove a screw from H Amp Angle.
3
Cylinder Unit & RT Flex. Flame.
Fig. D3-1
1) Remove a screw from RT Flex. Flame.
Fig. D3-2
2) Remove 3 screws and then take Cylinder Spring out.
Fig. D3-3
3) Remove a screw and take RT Flex. Flame out.
4
LED Holder, Cover plate & Idler U.
Fig. D4-1
1) Pull up and remove LED Holder.
Fig. D4-2
2) Move LED Flat Cable out of position and unhook 2 springs.
Fig. D4-3
3) Remove 5 screws and remove Cover Plate & Idler U.
5
Sub Chassis Unit
Fig. D5-1
1) Remove 4 screws.
Fig. D5-2
2) Remove a screw and unhook a spring from Pinch Arm.
6
Pinch Arm & Center Gear
Fig. D6-1
1) Remove Cut Washer and take Pinch Arm out.
2) Take Center Gear out.
2) Take Center Gear out.
Fig. D6-2
3) Take Center Gear Spacer out.
7
Rail Unit
Fig. D7-1
1) Make half loading until / Connection Arm comes out.
Fig. D7-2
2) Disconnect Connection Arms.
a) Hold Loading Gear side.
b) Disconnect connection arms.
a) Hold Loading Gear side.
b) Disconnect connection arms.
Fig. D7-3
3) Remove 4 screws.
8
T-Loading Gear & S-Loading Gear
Fig. D8
1) Take T-Loading Gear out.
2) Remove Cut Washer on S-Loading Gear and take S-Loading Gear
out.
* Removed Cut Washer can not be used again.
2) Remove Cut Washer on S-Loading Gear and take S-Loading Gear
out.
* Removed Cut Washer can not be used again.
9
Gear Cover
Fig. D9
1) Remove a screw and slide Gear Cover to take out.
10
Pinch Beetle & Release Beetle
Fig. D10
1) Remove a washer and take Pinch Beetle and Release Beetle out
together.
together.
11
Tension Lever & Eject Arm.
Fig. D11
1) Remove a screw and take Tension Lever out.
2) Remove a washer and take Eject Arm out.
2) Remove a washer and take Eject Arm out.
12
Interface Gears
Fig. D12
1) Remove 4 Gears.
13
Cam Gear
Fig. D13
1) Remove Cam Gear.
file:///C|/Documents%20and%20Settings/Someone/My%20Documents/202/s0302000000.html (1 of 23) [02.10.2002 13:24:22]
Click on the first or last page to see other Q-MECHANISM service manuals if exist.