Read Panasonic H-HS35100PP / H-HS35100E / H-HS35100GK Service Manual online
17
4.4.4.
Installation of the Main PCB unit
and the Lens mount contact unit
and the Lens mount contact unit
1. Connect 4 connectors.
4.4.5.
Installtion of the OIS switch
1. Install the OIS switch in the following state.
Then, apply bond.(Refer to 4.2.2.)
4.4.6.
Installtion of the Rear frame unit
1. Connect a FPC from OIS switch by tweezers etc..
Then, tighten the 4 screws (F) with specified torque in
numerical order..
(Torque: 17±1N ・ cm)
numerical order..
(Torque: 17±1N ・ cm)
4.4.7.
Installtion of the Mount washer
1. Put the Mount washer on the Rear frame unit slowly.
Click on the first or last page to see other H-HS35100PP / H-HS35100E / H-HS35100GK service manuals if exist.