Read Panasonic H-H020PP / H-H020E / H-H020GK Service Manual online
14
5.2.2.
Assembly procedure
Important:
When tightening the screw, use a torque driver (RFKZ0456)
by ordering the screwing order with specified torque
described in each step.
by ordering the screwing order with specified torque
described in each step.
5.2.2.1.
Installation of the 1st lens frame
unit
unit
1. Tighten the 3 screws (A) with specified torque in numeri-
cal order.
(Torque Driver: RFKZ0456)
(Torque: 8 ± 1.0 N-cm)
(Torque Driver: RFKZ0456)
(Torque: 8 ± 1.0 N-cm)
5.2.2.2.
Installation of the Decoration Ring
1. Install the decoration ring by referring the phase mark.
(Use new one, do not use the one which is removed.)
2. After installing the decoration ring, press the decoration
ring with finger.
Click on the first or last page to see other H-H020PP / H-H020E / H-H020GK service manuals if exist.