Read Panasonic H-H020PP / H-H020E / H-H020GK Service Manual online
9
4 Disassembly/Assembly procedures
4.1.
Disassembly and Assemble Procedures
It is recommended dealing with Clean box, to keep maintaining the dustproof environment.
(Refer to “3.2. Clean Box” section of this service manual for details.)
IMPORTANT:
(Refer to “3.2. Clean Box” section of this service manual for details.)
IMPORTANT:
1. When servicing the enclosure part (refer to Fig. C1), it must be performed inside of satisfied clean level.
(Satisfied clean level: Less than class 10,000 (Federal Standard 209D))
As for procedure, refer to the “5 Maintenance” for detailes.
As for procedure, refer to the “5 Maintenance” for detailes.
2. To minimize the possibilities/risk of getting the dust/dirt on the lens surface, keep covering the lens unit with lens caps
(front & rear), other than necessary cases.
3. Do not touch the surface of the lens glasses with your fingers.
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
Proceed disassemble/assemble, by referring the following table and Fig.C1.
NOTE:
1. When installing the screws, be sure to use the torque driver (RFKZ0456) and tighten the screws with specified torque,
mentioned on the above table.
2. The Ref.B207 is no need to remove/install for disassembly and assembly.
3. Use small driver (VFK1390) when removing/tighten the B208.
3. Use small driver (VFK1390) when removing/tighten the B208.
Interchangeable Lens (H-H020)
Click on the first or last page to see other H-H020PP / H-H020E / H-H020GK service manuals if exist.