Read Panasonic H-H020APP / H-H020AE / H-H020AGK Service Manual online
14
4.3.
Assembly procedure
Important:
When tightening the screw, use a torque driver (RFKZ0456)
by ordering the screwing order with specified torque
described in each step.
by ordering the screwing order with specified torque
described in each step.
4.3.1.
Installation of the 1st lens frame
unit
unit
1. Tighten 3 screws (A) in numerical order by using the
torque driver with specified torque.
(Torque Driver:RFKZ0456)
(Torque:8 ± 1 N ・ cm)
(Torque Driver:RFKZ0456)
(Torque:8 ± 1 N ・ cm)
4.3.2.
Installation of the Decoration ring
1. Please insert the dent of the Decoration ring to the con-
vex of the 1st lens frame unit.
• Use new one, do not use the one which is removed.
• Double-stick tape sticks to the Decoration ring of there-
• Double-stick tape sticks to the Decoration ring of there-
pair part.
Please remove the old double-stick tape from the Len-
stop unit.
Please remove the old double-stick tape from the Len-
stop unit.
2. After installing the Decoration ring, use a soft cloth to
press it into place.
Click on the first or last page to see other H-H020APP / H-H020AE / H-H020AGK service manuals if exist.