H-FS100300PP, H-FS100300E, H-FS100300GK - Panasonic Digital Camera Service Manual (repair manual). Page 10

Read Panasonic H-FS100300PP / H-FS100300E / H-FS100300GK Service Manual online

10
5 MAINTENANCE
5.1.
ABOUT THE LENS
5.1.1.
DUST / DIRT ON THE OUTER CASING PART(S)
1. Blow off the dust first, then sweep out the dust from narrower spaces with soft cleaning brush.
2. Wipe up the Outer casing part with the dry fuzz-free cloth.
5.1.2.
DUST / DIRT ON THE LENS GLASSES
Define the location of the dust / dirt first, whether it is outside lens surface or not.
1. When it is outside surface of the lens:
When the dust and / or dirt gets on the outer side surface of the Lens glasses, order the following procedures.
a. Blow off the dust on the Lens glass surface with the Blower, gently. (Do not Blow too strongly.)
b. Wipe out the dirt on the lens glass surface with Lens cleaning KIT (VFK1900BK) if necessary.
(Consult the Instruction sheet which is included in the Lens cleaning KIT in details.)
2. When it is inside of the lens:
Refer to the “5.3 Method of cleaning inside of lens” section of this service manual.
5.2.
General description (Lens cleaning)
When there is a dust/dirt inside surface of the 1st lens frame unit, remove it by referring the following procedures.
Important:
1. When removing the 1st lens frame unit, it has to be proceed inside of satisfied clean level.
(Less than class 10,000 Federal Standard 209D)
As for clean box, refer to the "3.2. CLEAN BOX", in details.
2. When tighten the screws (A), use torque driver (RFKZ0456) with specified torque.
3. To keep the Lens performance, use only the 1st lens frame unit which was fitted as it was.
Therefore, the 1st lens frame unit is not supplied as spare parts.
Also do not exchange the 1st lens unit taking from others.
Page of 15
Display

Click on the first or last page to see other H-FS100300PP / H-FS100300E / H-FS100300GK service manuals if exist.