Read Panasonic H-FS100300PP / H-FS100300E / H-FS100300GK Service Manual online
11
5.3.
Method of cleaning inside of lens
5.3.1.
Disassembly Procedure
Important:
It must be performed inside of satisfied clean level.
(Satisfied clean level: Less than class 10,000 Federal Standard 209D).
(Satisfied clean level: Less than class 10,000 Federal Standard 209D).
1.Removal of the Decoration Ring
1. Decoration ring is sticked on the 1st lens frame unit.
2. Insert the needle to Gap “A” (between the Decoration ring
2. Insert the needle to Gap “A” (between the Decoration ring
and Lens glass),and peel off the Decoration ring gentlly.
2 Removal of the 1st Lens Frame Unit
Important:
Important:
When removing the 1st lens frame unit, it has to be proceed
inside of specified clean level.
(Less than class 10,000 Federal Standard 209D)
inside of specified clean level.
(Less than class 10,000 Federal Standard 209D)
1. Remove the 3 screws (A) and then remove the 1st lens
frame unit.
3 Removal of a dust /dirt
1. Blow off the dust on the Lens glass surface with
the Blower, gently. (Do not Blow too strongly.)
2. Although after blowing, the dust/dirt does not blow off,
wipe out the dirt on the lens glass surface with
Lens cleaning KIT. (VFK1900BK)
(Consult the Instruction sheet which is included in
the Lens cleaning KIT in details.)
Lens cleaning KIT. (VFK1900BK)
(Consult the Instruction sheet which is included in
the Lens cleaning KIT in details.)
Click on the first or last page to see other H-FS100300PP / H-FS100300E / H-FS100300GK service manuals if exist.