H-F008PP, H-F008E, H-F008GK - Panasonic Digital Camera Service Manual (repair manual). Page 9

9

It is recommended dealing with Clean box, to keep maintaining the dustproof environment.
(Refer to “3.2. Clean Box” section of this service manual for details.)
    
IMPORTANT:

1. When servicing the surrounding part with red line (refer to Fig.D1), it must be performed inside of

satisfied clean level. (Satisfied clean level: Less than class 10,000 Federal Standard 209D).
As for procedure, refer to the “5 Maintenance” for details.

2. To minimize the possibilities/risk of getting the dust/dirt on the lens surface, 

keep covering the lens unit with Lens caps (front & rear), other than necessary cases.

3. Do not touch the surface of the lens glasses with your fingers.
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).

     
Proceed disassemble/ and assemble, by referring the following table and Fig.D1
NOTE:

1. When tightening the screw, use a Torque driver (RFKZ0456) by ordering the screwing order with specified 

torque mentioned in each step.

2. Use VFK1390 (small driver) when removing/tighten the B13.
3. The Ref.B12 is no need to remove / install for disassembly and assembly.

If necessary, use VFK1390 (small driver) when screwing

Fig. D1