DMC-TZ4P, DMC-TZ4PC, DMC-TZ4PL, DMC-TZ4EB, DMC-TZ4EE, DMC-TZ4EF, DMC-TZ4EG, DMC-TZ4E, DMC-TZ11GC, DMC-TZ11GK, DMC-TZ11GN, DMC-TZ11GT, DMC-TZ11GJ - Panasonic Digital Camera Service Manual (repair manual). Page 27

Read Panasonic DMC-TZ4P / DMC-TZ4PC / DMC-TZ4PL / DMC-TZ4EB / DMC-TZ4EE / DMC-TZ4EF / DMC-TZ4EG / DMC-TZ4E / DMC-TZ11GC / DMC-TZ11GK / DMC-TZ11GN / DMC-TZ11GT / DMC-TZ11GJ Service Manual online

27
8.3.9.
Removal of the Battery Case Unit 
Fig. D11
NOTE: (When Assembling) 
Be sure to confirm the following points when assembling.
• The Screw is tightened enough. 
• Assembling conditions are fine. (No distortion, no illegal-
space.) 
• No dust and/or dirt on every Lens surfaces. 
• LCD image is fine. (No dust and dirt on it, and no gradient
images.) 
8.4.
Disassembly Procedure for the
Lens
NOTE: When Disassembling and Assembling for the Lens 
1. To minimize the possibility of the CCD being dirt, perform
disassemble and/or assemble under the condition of the
CCD is being mounted. 
Disassembling procedures for the CCD unit, refer to item
8.6. 
2. Take care that the dust and dirt are not entered into the
lens. 
In case of the dust is putted on the lens, blow off them by
airbrush. 
3. Do not touch the surface of lens. 
4. Use lens cleaning KIT (BK)(VFK1900BK). 
5. Apply the grease to the point where is shown to" Grease
apply" in the figure. 
8.4.1.
Removal of the Zoom Motor Unit
and Master Flange Unit
1. Unsolder (16 points).
2. Remove the libs (4 points).  
3. Unscrew the 6 screws (A). 
4. Remove the zoom motor unit. 
5. Remove the master flange unit. 
Page of 56
Display

Click on the first or last page to see other DMC-TZ4P / DMC-TZ4PC / DMC-TZ4PL / DMC-TZ4EB / DMC-TZ4EE / DMC-TZ4EF / DMC-TZ4EG / DMC-TZ4E / DMC-TZ11GC / DMC-TZ11GK / DMC-TZ11GN / DMC-TZ11GT / DMC-TZ11GJ service manuals if exist.