Read Panasonic DMC-LX1PP / DMC-LX1EB / DMC-LX1EG / DMC-LX1EGM / DMC-LX1GC / DMC-LX1GD / DMC-LX1GK / DMC-LX1GN / DMC-LX1GT / DMC-LX1SG Service Manual online
4
1.4.
How to Discharge the Capacitor on Flash PCB
CAUTION:
1. Be sure to discharge the capacitor on FLASH PCB.
2. Be careful of the high voltage circuit on FLASH PCB when servicing.
2. Be careful of the high voltage circuit on FLASH PCB when servicing.
[Discharging Procedure]
1. Refer to the disassemble procedure and Remove the necessary parts/unit.
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
Ω /5W).
(an equivalent type of resistor may be used.)
3. Put the resistor between both terminals of capacitor on FLASH PCB for approx. 5 seconds.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
Fig. F1
Click on the first or last page to see other DMC-LX1PP / DMC-LX1EB / DMC-LX1EG / DMC-LX1EGM / DMC-LX1GC / DMC-LX1GD / DMC-LX1GK / DMC-LX1GN / DMC-LX1GT / DMC-LX1SG service manuals if exist.