Read Panasonic DMC-LC5PP / DMC-LC5E / DMC-LC5B / DMC-LC5A / DMC-LC5EN Service Manual online
6 SERVICE NOTES
6.1. WHEN REPLACING THE MAIN C.B.A.
After replacing the MAIN C.B.A. be sure to write the data in Flash ROM with TATSUJIN KIT in accordance with the instruction given
by TATSUJIN KIT.
by TATSUJIN KIT.
(There are two kinds of the Flash ROM data, one is NTSC version and the other one is PAL version.)
Then, adjust and/or confirm that each adjustment value or performance to be within specification.
6.2. SERVICE POSITION
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
No.
Parts No.
Connection
Form
1
VFK1582A2125
P6008 (MAIN) - P8001(STROBE)
21PIN 0.5 FFC
2
VFK1575C3320
P6003 (MAIN) - B/W LCD
33PIN 0.3 FFC
3
VFK1582A1225
P6007 (MAIN) - AF SENSOR
12PIN 0.5 FFC
4
VFK1443
P3001 (MAIN) - CCD
18PIN 0.5 FFC
5
VFK1175
P6006 (MAIN) - TOP OPERATION
16PIN 0.5 FFC
6
VFK0977
P6009 (MAIN) - REAR OPERATION
20PIN 0.5 FFC
7
VFK1480
P7002 (MAIN) - LENS UNIT
6PIN 0.5 FFC
8
VFK1441
P6006 (MAIN) - FRONT OPERATION
8PIN 0.5 FFC
9
VFK1284
P4001 (MAIN) - LCD UNIT
24PIN 0.5 FFC
CAUTION-1. (When servicing Strobe C.B.A. / STROBE UNIT)
1. Be sure to discharge the capacitor on STROBE C.B.A. before disassembling the STROBE C.B.A.
Refer to “HOW TO DISCHARGE THE CAPACITOR ON STROBE C.B.A.”.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on STROBE C.B.A. when setting.
3. DO NOT allow other parts to touch the high voltage circuit on STROBE C.B.A.
7
DMC-LC5PP / DMC-LC5E / DMC-LC5B / DMC-LC5A / DMC-LC5EN
Click on the first or last page to see other DMC-LC5PP / DMC-LC5E / DMC-LC5B / DMC-LC5A / DMC-LC5EN service manuals if exist.