Read Panasonic DMC-LC33PP / DMC-LC33PM / DMC-LC33E / DMC-LC33B / DMC-LC33A / DMC-LC33EN / DMC-LC33T / DMC-LC33KR (serv.man2) Service Manual online
5.3. HOW TO DISCHARGE THE CAPACITOR ON MAIN C.B.A.
CAUTION:
1. Be sure to discharge the capacitor on FLASH C.B.A. after removing the Front case.
2. Be careful of the high voltage circuit on FLASH C.B.A. when servicing.
[Discharging Procedure]
1. Refer to the disassemble procedure and Remove the necessary parts/unit.
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
Ω
/5W).
(an equivalent type of resistor may be used.)
3. Put the resistor between both terminals of capacitor on FLASH C.B.A. for approx. 5 seconds.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
5.4. CLEANING LENS, OPTICAL VIEWFINDER AND LCD PANEL
Do not touch the surface of lens, optical viewfinder and LCD Panel with your hand.
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the optical viewfinder and LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the
their surface.
their surface.
Note:
A lens cleaning paper and lens cleaner are available at local camera shops and market place.
11
DMC-LC33PP / DMC-LC33PM / DMC-LC33E / DMC-LC33B / DMC-LC33A / DMC-LC33EN / DMC-LC33T / DMC-LC33KR
Click on the first or last page to see other DMC-LC33PP / DMC-LC33PM / DMC-LC33E / DMC-LC33B / DMC-LC33A / DMC-LC33EN / DMC-LC33T / DMC-LC33KR (serv.man2) service manuals if exist.