Read Panasonic DMC-L10KPP / DMC-L10KE / DMC-L10KEB / DMC-L10KEG / DMC-L10KGC / DMC-L10KGD / DMC-L10KGK / DMC-L10KGN / DMC-L10KGT Service Manual online
15.2.2. Disassembly Procedure
No.
Item
Fig
Removal
1
Inner Hood
(Fig. D1)
3 Screws (A)
Inner Hood
Inner Hood
2
Bayonet Ring Unit
(Fig. D2)
1 Screw (B)
1 Screw (C)
GND Board
1 Screw (C)
GND Board
(Fig. D3)
4 Screws (D)
Mount Washer
Bayonet Ring Unit
Mount Washer
Bayonet Ring Unit
3
Manual Focus
Rubber
Zoom Rubber
Rubber
Zoom Rubber
(Fig. D4)
Manual Focus Rubber
Zoom Rubber
Zoom Rubber
4
Decoration Ring
(Fig. D5)
Decoration Ring
NOTE:
When Disassembling and Assembling for the Lens
1. To minimize the possibilities of getting the dust/dirt on the
lens surface, keep putting the lens cap other than
necessary case.
necessary case.
2. The parts other than listed in replacement part list are not
allowed to disassemble/assemble.
3. When tighten the screws, use a Torque Driver (RFKZ0456).
The Torque specification is indicated in each Figure.
4. Take care that the dust and dirt are not entered into the
lens.
In case of the dust is putted on the lens, blow off them by
airbrush.
airbrush.
5. Do not touch the surface of lens.
6. Use lens cleaning KIT (BK) (VFK1900BK).
15.2.2.1. Removal of the Inner Hood
(Fig. D1)
15.2.2.2. Removal of the Bayonet Ring
Unit
(Fig. D2)
32
DMC-L10KPP / DMC-L10KE / DMC-L10KEB / DMC-L10KEG / DMC-L10KGC / DMC-L10KGD / DMC-L10KGK / DMC-L10KGN / DMC-L10KGT
Click on the first or last page to see other DMC-L10KPP / DMC-L10KE / DMC-L10KEB / DMC-L10KEG / DMC-L10KGC / DMC-L10KGD / DMC-L10KGK / DMC-L10KGN / DMC-L10KGT service manuals if exist.