Read Panasonic DMC-L10KPP / DMC-L10KE / DMC-L10KEB / DMC-L10KEG / DMC-L10KGC / DMC-L10KGD / DMC-L10KGK / DMC-L10KGN / DMC-L10KGT Service Manual online
Attribute
Main item
Sub item
Error code
Contents
High 4 bits Low 4 bits
LENS
Lens
Communication
18*0
0000
|
FFFF
Lens communication error.
HARD
VENUS A/D
Flash
28*0
0000
Flash charging capacitor did not been fully charged within 20 seconds.
FLASH ROM
Data Area
2B*0
0001
Flash ROM data reading error is detected when the unit turns ON.
0002
Flash ROM data writing error is detected when the unit turns OFF.
Program Area
0005
Firmware update error.
SYSTEM IC
Initialization
2C*0
0001
Clock IC initialization failure error.
SOFT
CPU
Reset
30*0
0001
|
FFFF
System error (NMI reset).
Recording
Media
SD Memory
Card
31*0
0001
SD memory card logic error.
SD memory card format error.
When it is detected, [MEMORY CARD ERROR FORMAT THIS
CARD?]
is displayed on the screen.
SD memory card format error.
When it is detected, [MEMORY CARD ERROR FORMAT THIS
CARD?]
is displayed on the screen.
0002
SD memory card physical error.
During formatting the SD memory card, there is no response from the
card.
If the mini-SD memory card is used, check the SD memory card
adaptor.
During formatting the SD memory card, there is no response from the
card.
If the mini-SD memory card is used, check the SD memory card
adaptor.
0004
SD memory card writing error.
Check the SD memory card. It might be damage one.
Check the SD memory card. It might be damage one.
CPU
STOP
38*0
0001,
0002
Camera task error.
ASIC hard
0003
AF time out error.
Mirror BOX
Mirror up
3E*0
0001
Mirror up operation error. There is no response from mirror unit.
Mirror down
0002
Mirror down operation error. There is no response from mirror unit.
Camera
System
3B*0
0000
Initialization failure.
System
System
35*0
0001
|
FFFF
System error.
35*1,
35*2
0000
System error (in recording pre-process).
About "*" indication in the above table:
The third digit from the left is different as follows.
−
In case of 0 (example: 18001000)
When the third digit from the left shows "0", this error occurred under the condition of INITIAL SETTINGS has been
completed.
completed.
It means that this error is occurred basically at user side.
−
In case of 8 (example: 18801000)
When the third digit from the left shows "8", this error occurred under the condition of INITIAL SETTINGS has been
released.
released.
(Example; Factory assembling-line before unit shipment, Service mode etc.)
It means that this error is occurred at service side.
·
6. How to returned to Normal Display:
Turn the power off and on, to exit from Error code display mode.
NOTE:
The error code can not be initialized.
27
DMC-L10KPP / DMC-L10KE / DMC-L10KEB / DMC-L10KEG / DMC-L10KGC / DMC-L10KGD / DMC-L10KGK / DMC-L10KGN / DMC-L10KGT
Click on the first or last page to see other DMC-L10KPP / DMC-L10KE / DMC-L10KEB / DMC-L10KEG / DMC-L10KGC / DMC-L10KGD / DMC-L10KGK / DMC-L10KGN / DMC-L10KGT service manuals if exist.