DMC-G3KEE - Panasonic Digital Camera Service Manual (repair manual). Page 4

4

1. Be sure to discharge the E. Capacitor on  FLASH  P.C.B..
2. Be careful of the high voltage circuit on FLASH  P.C.B. when servicing.

1. Refer to the disassemble procedure and remove the necessary parts/unit.
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k

Ω /5W).

(An equivalent type of resistor may be used.)

3. Put the resistor between both terminals of E. Capacitor on FLASH  P.C.B. for approx. 5 seconds.
4. After discharging, confirm that the E. Capacitor voltage is lower than 10V by using a voltmeter.

Fig. F1