Read Panasonic DMC-FX77EB / DMC-FX77EE / DMC-FX77EF / DMC-FX77EG / DMC-FX77EP / DMC-FX77SG / DMC-FX78P / DMC-FX78PU / DMC-FX78GC / DMC-FX78GD / DMC-FX78GH / DMC-FX78GK / DMC-FX78GN / DMC-FX78GT Service Manual online
44
9.4.
After Adjustment
9.4.1.
Initial Setting
Since the initial setting has been released to execute the built-in adjustment software, it should be set up again before shipping the
camera to the customer.
Refer to the procedure described in “3.4.2. INITIAL SETTINGS” for details.
camera to the customer.
Refer to the procedure described in “3.4.2. INITIAL SETTINGS” for details.
[ IMPORTANT ]
1. The initial setting should be done again after completing the alignment. Otherwise, the camera will not work properly.
Therefore as a warning, the camera display a warning symbol “ ! ” on the LCD monitor every time the camera is turned off.
2. Confirm that status of all adjustment flag show “F”. Even if one of the adjustment flag shows “0”, initial setting programmed is
never executed.
3. Adjustment software “DIAS” is able to control the status of the adjustment flags.
The Adjustment software “DIAS” is available at “TSN Website”, therefore, access to “TSN Website” at “Support Information
from NWBG/VDBG-AVC”.
from NWBG/VDBG-AVC”.
Click on the first or last page to see other DMC-FX77EB / DMC-FX77EE / DMC-FX77EF / DMC-FX77EG / DMC-FX77EP / DMC-FX77SG / DMC-FX78P / DMC-FX78PU / DMC-FX78GC / DMC-FX78GD / DMC-FX78GH / DMC-FX78GK / DMC-FX78GN / DMC-FX78GT service manuals if exist.