Read Panasonic DMC-FS7P / DMC-FS7PC / DMC-FS7PR / DMC-FS7PU / DMC-FS7EB / DMC-FS7EE / DMC-FS7EF / DMC-FS7EG / DMC-FS7EP / DMC-FS7GC / DMC-FS7GD / DMC-FS7GJ / DMC-FS7GK / DMC-FS7GN / DMC-FS7GT Service Manual online
4
1.4.
How to Discharge the Capacitor on Flash Top PCB
CAUTION:
1.
Be sure to discharge the capacitor on FLASH TOP PCB.
2.
Be careful of the high voltage circuit on FLASH TOP PCB when servicing.
[Discharging Procedure]
1. Refer to the disassemble procedure and Remove the necessary parts/unit.
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
Ω /5W).
(an equivalent type of resistor may be used.)
3. Put the resistor between both terminals of capacitor on FLASH TOP PCB for approx. 5 seconds.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
Fig. F1
Click on the first or last page to see other DMC-FS7P / DMC-FS7PC / DMC-FS7PR / DMC-FS7PU / DMC-FS7EB / DMC-FS7EE / DMC-FS7EF / DMC-FS7EG / DMC-FS7EP / DMC-FS7GC / DMC-FS7GD / DMC-FS7GJ / DMC-FS7GK / DMC-FS7GN / DMC-FS7GT service manuals if exist.