S 310 STUDIO SERIES (serv.man3) - JBL Audio Service Tips (repair manual)

s 310 studio series (serv.man3) service tips
Model
S 310 STUDIO SERIES (serv.man3)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
46.07 KB
Type
PDF
Document
Service Tips
Brand
Device
Audio
File
s-310-studio-series-sm3.pdf
Date

Read JBL S 310 STUDIO SERIES (serv.man3) Service Tips online

JBL Incorporated          
           250 Crossways Park Dr.   Woodbury, New York   11797
 
   
TECH TIPS
Troubleshooting tips and solutions to common service problems
For models: N28, N38, ND310, S26, S38, S310, S312, S412P
TIP# JBLTT2000-02
Complaint:
Probable Cause:
A small quantity of some early versions of the above models were manufactured with an inconsistent fit
between the port tube and cabinet, resulting in a loose port tube in some cases.
Solution:
1)  If the port tube is still inserted or partially inserted in the cabinet, remove it by pulling it straight out.  Port
tube appearance will vary by model.
2)  Note the contact area between the port tube and the cabinet.  On this area, apply a bead of adhesive;
recommended are hot-melt adhesive or silicon sealer.  If silicon sealer is used, drying time will be
measured in hours, allowing plenty of time to insert and align the port tube properly.  CAUTION: with hot-
melt adhesive, drying and setting time is measured in seconds, and alignment of the port tube with every
model excepting the S38 is critical for proper appearance.
3)  Insert the port tube back into the cabinet, noting proper alignment.
Display

Download JBL S 310 STUDIO SERIES (serv.man3) Service Tips

Here you can read online and download JBL S 310 STUDIO SERIES (serv.man3) Service Tips in PDF. S 310 STUDIO SERIES (serv.man3) service tips will guide through the process and help you recover, restore, fix, disassemble and repair JBL S 310 STUDIO SERIES (serv.man3) Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.