Read Panasonic DMC-FS62EB / DMC-FS62EE / DMC-FS62EF / DMC-FS62EG / DMC-FS62EP / DMC-FS62GC / DMC-FS62GJ / DMC-FS62GN Service Manual Simplified online
4
1.4.
How to Discharge the Capacitor on Flash Top PCB
CAUTION:
1.
Be sure to discharge the capacitor on FLASH TOP PCB.
2.
Be careful of the high voltage circuit on FLASH TOP PCB when servicing.
[Discharging Procedure]
1. Refer to the disassemble procedure and Remove the necessary parts/unit.
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
Ω /5W).
(an equivalent type of resistor may be used.)
3. Put the resistor between both terminals of capacitor on FLASH TOP PCB for approx. 5 seconds.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
Fig. F1
Click on the first or last page to see other DMC-FS62EB / DMC-FS62EE / DMC-FS62EF / DMC-FS62EG / DMC-FS62EP / DMC-FS62GC / DMC-FS62GJ / DMC-FS62GN service manuals if exist.