Read Panasonic DMC-FS62EB / DMC-FS62EE / DMC-FS62EF / DMC-FS62EG / DMC-FS62EP / DMC-FS62GC / DMC-FS62GJ / DMC-FS62GN Service Manual Simplified online
ORDER NO. DSC0905035AE
B26
Digital Camera
Model No.
DMC-FS62EB
DMC-FS62EE
DMC-FS62EF
DMC-FS62EG
DMC-FS62EP
DMC-FS62GC
DMC-FS62GJ
DMC-FS62GN
DMC-FS62EE
DMC-FS62EF
DMC-FS62EG
DMC-FS62EP
DMC-FS62GC
DMC-FS62GJ
DMC-FS62GN
Vol.1
Colour
(S)-------Silver Type (except EF)
(K)-------Black Type
(P)-------Pink Type (except EF/EE/GN)
(A)-------Blue Type (except EE/GN)
(R)-------Red Type (except GC/GJ)
(S)-------Silver Type (except EF)
(K)-------Black Type
(P)-------Pink Type (except EF/EE/GN)
(A)-------Blue Type (except EE/GN)
(R)-------Red Type (except GC/GJ)
Please use this manual together with the service manual for
Model No.DMC-FS6P/PC/PR/PU/EB/EE/EF/EG/EP/GC/GJ/GK/GN/GT Vol.1 Order No.DSC0902003CE.
Model No.DMC-FS6P/PC/PR/PU/EB/EE/EF/EG/EP/GC/GJ/GK/GN/GT Vol.1 Order No.DSC0902003CE.
2
TABLE OF CONTENTS
PAGE
PAGE
1 SERVICE NAVIGATION ------------------------------------------3
1.1. INTRODUCTION -------------------------------------------3
1.2. Important Notice 1:(Other than U.S.A. and
1.2. Important Notice 1:(Other than U.S.A. and
Canadian Market) -----------------------------------------3
1.3. About the Lens Unit ---------------------------------------3
2 INITIAL SETTINGS ------------------------------------------------4
3 DIAGRAMS ----------------------------------------------------------7
3 DIAGRAMS ----------------------------------------------------------7
3.1. Overall Block Diagram ------------------------------------7
3.2. Flash Top Schematic Diagram --------------------------8
3.2. Flash Top Schematic Diagram --------------------------8
4 REPLACEMENT PARTS LIST ---------------------------------9
4.1. Frame & Casing Section ------------------------------- 10
4.2. Packing & Accessories Section---------------------- 11
4.2. Packing & Accessories Section---------------------- 11
3
1 SERVICE NAVIGATION
1.1.
INTRODUCTION
This Service Manual contains technical information which will help service personnel to understand and service the Digital Camera
Digital Camera; DMC-FS62 series
The Digital Camera DMC-FS62 series have been developed based on DMC-FS6 series.
Since this Service Manual does not cover the same part which is already described in the Service Manual for DMC-FS6 series,
when servicing, refer to the descriptions in the Service Manual for ; DMC-FS6P/PC/PR/PU/EB/EE/EF/EG/EP/GC/GJ/GK/GN/GT:
Order No. DSC0902003CE (Service Manual Vol. 1).
Digital Camera; DMC-FS62 series
The Digital Camera DMC-FS62 series have been developed based on DMC-FS6 series.
Since this Service Manual does not cover the same part which is already described in the Service Manual for DMC-FS6 series,
when servicing, refer to the descriptions in the Service Manual for ; DMC-FS6P/PC/PR/PU/EB/EE/EF/EG/EP/GC/GJ/GK/GN/GT:
Order No. DSC0902003CE (Service Manual Vol. 1).
1.2.
Important Notice 1:(Other than U.S.A. and Canadian Market)
When a part replacement is required for repairing MAIN PCB , replace as an assembled parts.
The following category is/are recycle module part. please send it/them to Central Repair Center.
MAIN PCB : VEP56074E
The following category is/are recycle module part. please send it/them to Central Repair Center.
MAIN PCB : VEP56074E
1.3.
About the Lens Unit
4
2 INITIAL SETTINGS
After replacing the MAIN PCB, be sure to perform the initial settings after achieving the adjustment by ordering the following
procedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
procedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, be sure to read the following CAUTIONS.
2. PROCEDURES:
• Precautions: Read the above "CAUTION 1" and "CAUTION 2", carefully.
• Preparation:
• Preparation:
1. Attach the Battery or AC Adaptor with a DC coupler to the unit.
2. Set the recording mode to the [NORMAL PICTURE] mode.
2. Set the recording mode to the [NORMAL PICTURE] mode.
(Press the [MODE] button and select the [NORMAL PICTURE] by pressing the “[ UP ] and [DOWN] of Cursor buttons”,
then press the [MENU/SET] button.)
NOTE:
then press the [MENU/SET] button.)
NOTE:
If the unit is other than [NORMAL PICTURE] mode, it does not display the initial settings menu.
• Step 1. The temporary cancellation of “INITIAL SETTINGS”:
Set the [REC]/[PLAYBACK] selector switch to “[ REC ] (Camera mark)”.
While keep pressing “[ UP ] of Cursor button” and [ iA ] button simultaneously, turn the Power on.
While keep pressing “[ UP ] of Cursor button” and [ iA ] button simultaneously, turn the Power on.
• Step 2. The cancellation of “INITIAL SETTINGS”:
Set the [REC]/[PLAYBACK] selector switch to “[ PLAYBACK ]”.
Press “[ UP ] of Cursor button” and [ iA ] button simultaneously, then turn the Power off.
Press “[ UP ] of Cursor button” and [ iA ] button simultaneously, then turn the Power off.
• Step 3. Turn the Power on:
Set the [REC]/[PLAYBACK] selector switch to “[ REC ] (Camera mark)”, and then turn the Power on.
• Step 4. Display the INITIAL SETTING:
NOTE:
If the unit is other than [NORMAL PICTURE] mode, it does not display the initial settings menu.
While keep pressing [ MENU/SET ] and “[ RIGHT ] of Cursor buttons” simultaneously, turn the Power off.
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of “INITIAL SETTINGS” menu form as follows:
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of “INITIAL SETTINGS” menu form as follows: