Read Panasonic DMC-FP5P / DMC-FP5PC / DMC-FP5PR / DMC-FP5PU / DMC-FP5EB / DMC-FP5EE / DMC-FP5EG / DMC-FP5GA / DMC-FP5GC / DMC-FP5GF / DMC-FP5GK / DMC-FP5GT Service Manual online
4
1.4.
How to Discharge the E.Capacitor on Flash P.C.B.
CAUTION:
1. Be sure to discharge the E.capacitor on FLASH P.C.B..
2. Be careful of the high voltage circuit on FLASH P.C.B. when servicing.
2. Be careful of the high voltage circuit on FLASH P.C.B. when servicing.
[Discharging Procedure]
1. Refer to the disassemble procedure and remove the necessary parts/unit.
2. Install the insulation tube onto the lead part of resistor (ERG5SJ102:1k
2. Install the insulation tube onto the lead part of resistor (ERG5SJ102:1k
Ω /5W).
(An equivalent type of resistor may be used.)
3. Place a resistor between both terminals of E.capacitor on the FLASH P.C.B. for approx. 5 seconds.
4. After discharging, confirm that the E.capacitor voltage is lower than 10V using a voltmeter.
4. After discharging, confirm that the E.capacitor voltage is lower than 10V using a voltmeter.
Fig. F1
Click on the first or last page to see other DMC-FP5P / DMC-FP5PC / DMC-FP5PR / DMC-FP5PU / DMC-FP5EB / DMC-FP5EE / DMC-FP5EG / DMC-FP5GA / DMC-FP5GC / DMC-FP5GF / DMC-FP5GK / DMC-FP5GT service manuals if exist.