Read Panasonic WV-PS154 / WV-PS15 Service Manual online
WV-PS154/WV-PS15
– 2 –
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
( WV-PS15 )
( WV-PS15 )
ON
OFF
POWER
GND
SIGNAL
(4V[p-p]75
Ω
)
CAMERA
IN
VIDEO
OUT
AUDIO
OUT
VD/SYNC
IN
VD/SYNC
OUT
w
e
r
t
y u
i
q
q
Power On/Off Switch (POWER ON/OFF)
This switch is used to turn the camera drive unit and con-
nected camera on and off. The indicator lights up when
the camera drive unit is switched on.
When turns this switch off, the power supply does not
interrupt. In such a case, disconnect the AC cord or turn
the circuit breaker off.
This switch is used to turn the camera drive unit and con-
nected camera on and off. The indicator lights up when
the camera drive unit is switched on.
When turns this switch off, the power supply does not
interrupt. In such a case, disconnect the AC cord or turn
the circuit breaker off.
w
Camera Input Connector (CAMERA IN)
This connector receives colour or B/W composite video
signal from the camera. It also supplies DC power and
vertical drive pulses for synchronizing signals to the cam-
era and receive video and audio signals from the cam-
era.
signal from the camera. It also supplies DC power and
vertical drive pulses for synchronizing signals to the cam-
era and receive video and audio signals from the cam-
era.
e
Video Output Connector (VIDEO OUT)
Video signals from the camera is output from this con-
nector for input to outboard devices.
nector for input to outboard devices.
r
Audio Output Connector (AUDIO OUT)
Audio signal from the camera is output from this connec-
tor for input to the outboard devices (if an applicable
camera is connected).
tor for input to the outboard devices (if an applicable
camera is connected).
t
VD/SYNC Input Connector (VD/SYNC IN)
The VD (Vertical Drive) pulse or VS (Video Sync) signal
is supplied to this connector for synchronizing the sys-
tem.
is supplied to this connector for synchronizing the sys-
tem.
y
VD/SYNC Output Connector (VD/SYNC OUT)
The VD (Vertical Drive) pulse or VS (Video Sync) signal
is output from this connector for synchronizing other sys-
tem components.
The VD (Vertical Drive) pulse or VS (Video Sync) signal
is output from this connector for synchronizing other sys-
tem components.
u
Signal Ground Terminal (SIGNAL GND)
i
AC Cord
■
■
Front View
■
■
Rear View
Click on the first or last page to see other WV-PS154 / WV-PS15 service manuals if exist.