Read Panasonic WV-CS950 / WV-CS954E Service Manual online
2-15
4.2. Back Focus Adjustment
Note: This Back Focus Adjustment is required in the follow
ing cases;
1. Replacing the CCD image sensor.
2. Replacing the Sensor Board.
2. Replacing the Sensor Board.
4.2.1. Starting E.V.R. Adjustment Program
8
Insert new floppy disk containing DOS Operating System
and the E.V.R Adjustment Program into the computer
(IBM PC/AT) and turn on the Power Switch of the com-
puter.
and the E.V.R Adjustment Program into the computer
(IBM PC/AT) and turn on the Power Switch of the com-
puter.
8
When starting an adjustment, at the prompt, type
RADJ2 CS95AF1 and press the ENTER key, an initial
menu page as shown in Fig. 4-2-1 will be displayed.
RADJ2 CS95AF1 and press the ENTER key, an initial
menu page as shown in Fig. 4-2-1 will be displayed.
4.2.2. Saving the Adjustment Data
This saving procedure is recommended to keep the current
adjustment status of the camera.
adjustment status of the camera.
8
Press the SAVE (F5) key of the computer, and the com-
puter will ask you for the file name.
puter will ask you for the file name.
8
Type xxxxxxxx.EV2 B40 19FF. Give an appropriate file
name for xxxxxxxx within 8 letters, but do not use
CS95E.
name for xxxxxxxx within 8 letters, but do not use
CS95E.
8
Press the ENTER key.
4.2.3. Loading the Adjustment Data
This loading procedure is recommended to return the adjust-
ment status of the camera to the factory default setting or
the setting you saved before.
ment status of the camera to the factory default setting or
the setting you saved before.
8
Press the LOAD (F1) key of the computer, and the com-
puter will ask you for the file name.
puter will ask you for the file name.
8
Type CS95E.EV2 or xxxxxxxx.EV2 (xxxxxxxx means a
file name you named before) and press the ENTER key.
file name you named before) and press the ENTER key.
4.2.4. Adjustment Procedure
q
Select the item "1.1. PAN/TILT POSITION" with the
ARROW key.
ARROW key.
w
Press the ENTER key for presetting the lens position.
The lens turns to the center of the Dome Cover.
e
Place the Camera facing down more than 5 degrees (ide-
ally 90 degrees) from the level as shown in Fig. 4-2-2.
ally 90 degrees) from the level as shown in Fig. 4-2-2.
r
Set the Rediation Chart 10 m away from the Camera as
shown in Fig. 4-2-2.
shown in Fig. 4-2-2.
Note: The air holes on the Lens Cover should be down
facing floor.
t
If 10 m is not secured between the Camera and the
Radiation Chart:
Place the camera facing down more than 5° from the
level.
Pat the camera body gently. (See the Note below.)
Then place the camerra carefully on the table as shown in
Fig. 4-2-3. (Do not give any vibration to the camera.)
Radiation Chart:
Place the camera facing down more than 5° from the
level.
Pat the camera body gently. (See the Note below.)
Then place the camerra carefully on the table as shown in
Fig. 4-2-3. (Do not give any vibration to the camera.)
PANASONIC REMOTE EVR ADJUSTMENT SYSTEM CCTV PRODUCT: CS950 EEPROM:0
✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽
MENU
✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽
Page (1/1)
✽ ✽ ✽ ✽
NTSC
1.1. PAN/TILT POSITION
1.2. BACK FOCUS ADJUST
1.2. BACK FOCUS ADJUST
<CONTENTS> TELE 10m
<INSTRUCTION> PLEASE CHOOSE MENU DATA BY ARROW-KEY
<INSTRUCTION> PLEASE CHOOSE MENU DATA BY ARROW-KEY
LOAD (F1) QUIT (F3) SAVE (F5)
Fig. 4-2-1
Note : Reason for facing the camera down.
The Zoom-Lens unit has a moving lens inside. This
moving lens requires a tolerance (10 µm order) when
starts to move.
Because of 1/4" CCD and x22 zooming raito, the toler-
ance will affect the focal point.
When adjusting the camera with the Lens facing down,
the tolerance will be always pulled downward by the
gravity, which makes it possible to adjust back foccus
as the best.
moving lens requires a tolerance (10 µm order) when
starts to move.
Because of 1/4" CCD and x22 zooming raito, the toler-
ance will affect the focal point.
When adjusting the camera with the Lens facing down,
the tolerance will be always pulled downward by the
gravity, which makes it possible to adjust back foccus
as the best.
Radiation Chart
10 m
more than 5˚
Radiation Chart
Table
10 m
Fig. 4-2-2
Fig. 4-2-3
Click on the first or last page to see other WV-CS950 / WV-CS954E service manuals if exist.