Read Panasonic WV-CP460 / WV-CP464 Service Manual online
– 10 –
WV-CP460 Series
9.1. 3200K R Gain Adjustment
Menu:
9.1. 3200K R_GAIN
Test Point:
CN2 (Video Output Connector)
I/F Board
Aim the Camera at the Colour Chip Chart.
Return the Colour Temperature from the 6500K to 3200K
by replacing Colour Conversion Filter from C4 to W12.
Adjust data with the ARROW keys so that the Red gain
becomes 220 ± 5%.
Press the ENTER key for next adjustment.
Return the Colour Temperature from the 6500K to 3200K
by replacing Colour Conversion Filter from C4 to W12.
Adjust data with the ARROW keys so that the Red gain
becomes 220 ± 5%.
Press the ENTER key for next adjustment.
Note: Chrominance phase and gain are adjusted to proper
position as shown in Fig. 5-12 and Table 5-3.
9.2. 3200K B Gain Adjustment
Menu:
9.2. 3200K B_GAIN
Test Point:
CN2 (Video Output Connector)
I/F Board
Keep the Colour Temperature at 3200K.
Adjust data with the ARROW keys so that the Yellow gain
becomes 100 ± 5%.
Press the ENTER key for next adjustment.
Adjust data with the ARROW keys so that the Yellow gain
becomes 100 ± 5%.
Press the ENTER key for next adjustment.
Note: Chrominance phase and gain are adjusted to proper
position as shown in Fig. 5-12 and Table 5-3.
9.3. 3200K Matrix Adjustment
Menu:
9.3. 3200K MATRIX
Test Point:
CN2 (Video Output Connector)
I/F Board
Keep the Colour Temperature at 3200K.
Adjust data with the ARROW keys so that the Red vector
phase becomes 108 ± 2°.
Repeat adjustment from steps 9.1 to 9.3 until both
chrominance phase and gain are adjusted to proper posi-
tion as shown in Fig. 5-12 and Table 5-3.
Adjust data with the ARROW keys so that the Red vector
phase becomes 108 ± 2°.
Repeat adjustment from steps 9.1 to 9.3 until both
chrominance phase and gain are adjusted to proper posi-
tion as shown in Fig. 5-12 and Table 5-3.
cy
g
M
G
Y
L
yl
B
b
G
C
Y
dG
10
°
0
°
10
°
dø
100%
75%
R
V
U
mg
r
20%
20%
dG
Table 5-3
Press the ENTER key for next adjustment.
Fig. 5-12
10.1. 5100K R Gain Adjustment
Menu:
10.1. 5100K R_GAIN
Test Point:
CN2 (Video Output Connector)
I/F Board
Aim the Camera at the Colour Chip Chart.
Change the Colour Temperature from the 3200K to
5100K by removing the Colour Conversion Filter from the
Lens.
Adjust data with the ARROW keys so that the Red gain
becomes 220 ± 5%.
Press the ENTER key for next adjustment.
Change the Colour Temperature from the 3200K to
5100K by removing the Colour Conversion Filter from the
Lens.
Adjust data with the ARROW keys so that the Red gain
becomes 220 ± 5%.
Press the ENTER key for next adjustment.
10.2. 5100K B Gain Adjustment
Menu:
10.2. 5100K B_GAIN
Test Point:
CN2 (Video Output Connector)
I/F Board
Keep the Colour Temperature at 5100K.
Adjust data with the ARROW keys so that the Yellow gain
becomes 100 ± 5 %.
Repeat adjusment from steps 10.1 and 10.2 until both
chrominance phase and gain are adjusted to proper posi-
tion as shown in Fig. 5-13 and Table 5-4.
Adjust data with the ARROW keys so that the Yellow gain
becomes 100 ± 5 %.
Repeat adjusment from steps 10.1 and 10.2 until both
chrominance phase and gain are adjusted to proper posi-
tion as shown in Fig. 5-13 and Table 5-4.
cy
g
M
G
Y
L
yl
B
b
G
C
Y
dG
10
°
0
°
10
°
dø
100%
75%
R
V
U
mg
r
20%
20%
dG
Fig. 5-13
Table 5-4
Press the ENTER key for next adjustment.
Table 5-46
Phase
Gain
Red
108
±
2
°
220
±
5 %
Yellow
165
±
5
°
100
±
5 %
Phase
Gain
Red
108
±
2
°
220
±
5 %
Yellow
165
±
5
°
100
±
5 %
Click on the first or last page to see other WV-CP460 / WV-CP464 service manuals if exist.