Read Panasonic WV-CP250 / WV-CP254E Service Manual online
2-2
8
Referring to Fig. 2-4, remove the Rear Escutcheon from
the Main Chassis.
the Main Chassis.
8
Remove one screw that secure the Rear Panel and
remove the Rear Panel from the Main Chassis.
remove the Rear Panel from the Main Chassis.
Fig. 2-4
8
Referring to Fig. 2-5, disconnect the connector CN1 on th
I/F Board and remove the Flexible Flat Cable.
I/F Board and remove the Flexible Flat Cable.
8
Remove two screws that secure the Front Unit.
8
Turn the Front Unit in the direction of the arrow and
remove the Front Unit from the Main Chassis.
remove the Front Unit from the Main Chassis.
Fig. 2-5
8
Referring to Fig. 2-6, disconnect the connector CN2 on
the I/F Board and remove the Wire Ass'y.
the I/F Board and remove the Wire Ass'y.
8
Remove three screws that secure the I/F Board and
remove the I/F Board from the Main Chassis.
remove the I/F Board from the Main Chassis.
Fig. 2-6
Hooks
Remove one screw.
Rear Panel
Rear Escutcheon
Hooks
Main Chassis
Remove two screws.
Flexible
Flat
Cable
Flat
Cable
I/F Board
Main Chassis
Front Unit
CN1
Main Chassis
Wire Ass'y
Remove three screws.
CN2
I/F Board
8
Referring to Fig. 2-7, disconnect the Connector CN102 on
the Main Board and remove the Flexible Flat Cable.
the Main Board and remove the Flexible Flat Cable.
8
Remove two screws that secure the Front Shield Plate
and remove the Front Shield Plate from the Front Unit.
and remove the Front Shield Plate from the Front Unit.
8
Disconnect the Connectors CN100 and CN102 on the
Main Board, and remove the Flexible Flat Cable and the
Wire Ass'y of the Front Unit.
Main Board, and remove the Flexible Flat Cable and the
Wire Ass'y of the Front Unit.
8
Remove two screws that secure the Main Board and
remove the Main Board from the Front Shield Plate.
remove the Main Board from the Front Shield Plate.
Fig. 2-7
8
Reconnect the Flexible Flat Cable and the Wire Ass'y of
the Front Unit to Cn100 and CN2 on the Main Board.
the Front Unit to Cn100 and CN2 on the Main Board.
8
Reconnect the Wire Ass'y of the Power Board to CN2 on
the I/F Board.
the I/F Board.
8
Reconnect the connectors by using the Extension Cable
(Refer to Fig. 1-1), between CN102 on the Main Board
and CN1 on the I/F Board for Adjustment.
(Refer to Fig. 1-1), between CN102 on the Main Board
and CN1 on the I/F Board for Adjustment.
Remove
two
screws.
two
screws.
Main Board
Flexible Flat Cable
CN102
CN100
Front Shield Plate
Front Unit
CN2
Wire Ass’y
Remove two screws.
Flexible Flat
Cable
Cable
Click on the first or last page to see other WV-CP250 / WV-CP254E service manuals if exist.