Read Panasonic WV-CL920 / WV-CL924 Service Manual online
– 11 –
LOCATION OF TEST POINTS AND ADJUSTING CONTROLS
CN404
CN9
CN401
CN402
IC409
IC408
CN1
CN403
CN8
Main Board (Component Side)
I/F Board (Component Side)
CN2
Video Output
Connector
Video Output
Connector
CN4
Gen-Lock Input
Connector
Gen-Lock Input
Connector
CN4
CN2
CN6
Auto Iris
Lens
Connector
Auto Iris
Lens
Connector
TD802 (SC VCXO)
(Pattern Side)
(Pattern Side)
TD801
(SC VCXO)
(SC VCXO)
To
Power Board Unit
(Power Board Ass'y)
Power Board Unit
(Power Board Ass'y)
To
Front
Unit
(Head
Optical
Ass'y)
Front
Unit
(Head
Optical
Ass'y)
To
Front Unit
(Filter Selection
Ass'y)
Front Unit
(Filter Selection
Ass'y)
Minimize
Chrominance
Level.
Chrominance
Level.
Fig. 5-14
After completing of the adjustment, press the QUIT (F3)
key, then the menu as shown in "<SAVE CAMERA DATA
TO FILE :
key, then the menu as shown in "<SAVE CAMERA DATA
TO FILE :
✽ ✽ ✽
, EVR? Y/N> will be displayed.
Press the N key, and then press the ENTER key to finish
of this adjustment procedure.
of this adjustment procedure.
11. High light Chroma Clip Adjustment
Menu:
11. HIGH LIGHT CHROMA CLIP
Test Point:
CN2 (Video Output Connector)
I/F Board
Adjust:
RAM8 (01F)
Aim the Camera at the White Chart or White Paper.
Return the Colour Temperature from the 5100K to 3200K
by mounting the Colour Conversion Filter W12 on the
Lens.
Adjust data with the ARROW keys so that the false
chrominance level becomes minimum as shown in Fig. 5-
14.
Return the Colour Temperature from the 5100K to 3200K
by mounting the Colour Conversion Filter W12 on the
Lens.
Adjust data with the ARROW keys so that the false
chrominance level becomes minimum as shown in Fig. 5-
14.
Note: The Data of 01F should be adjusted from FF, the first
minimum point of the false chrominance signal is as
adjusting point.
adjusting point.
Click on the first or last page to see other WV-CL920 / WV-CL924 service manuals if exist.