Read Panasonic WJ-SX550 Service Manual Supplement online
– 7 –
8
Press the 4 of 10-key, the message “NUM KEY 4” should
be shown on the LCD and the Data “STX SK 12 ETX”is
transmitted to the RS-485 line.
8
Press the 5 of 10-key, the message “NUM KEY 5” should
be shown on the LCD and the Data “STX SK 13 ETX” is
transmitted to the RS-485 line.
8
Press the 6 of 10-key, the message “NUM KEY 6” should
be shown on the LCD and the Data “STX SK 14 ETX” is
transmitted to the RS-485 line.
8
Press the 7 of 10-key, the message “NUM KEY 7” should
be shown on the LCD and the Data “STX SK 15 ETX” is
transmitted to the RS-485 line.
8
Press the 8 of 10-key, the message “NUM KEY 8” should
be shown on the LCD and the Data “STX SK 16 ETX” is
transmitted to the RS-485 line.
8
Press the 9 of 10-key, the message “NUM KEY 9” should
be shown on the LCD and the Data “STX SK 17 ETX” is
transmitted to the RS-485 line.
8
Press the MON of 10-key, the message “NUM KEY
MON” should be shown on the LCD and the Data “STX
SK 18 ETX” is transmitted to the RS-485 line.
8
Press the 0 of 10-key, the message “NUM KEY 0” should
be shown on the LCD and the Data “STX SK 19 ETX” is
transmitted to the RS-485 line.
8
Press the CAM of 10-key, the message “NUM KEY CAM”
should be shown on the LCD and the Data “STX SK 20
ETX”is transmitted to the RS-485 line.
8
Press the PRESET key, the message “PRESET” should
be shown on the LCD and the Data “STX SK 21 ETX” is
transmitted to the RS-485 line.
8
Press the IRIS CLOSE key, the message “IRIS CLOSE”
should be shown on the LCD and the Data “STX SK 22
ETX” is transmitted to the RS-485 line.
8
Press the IRIS OPEN key, the message “IRIS OPEN”
should be shown on the LCD and the Data “STX SK 23
ETX” is transmitted to the RS-485 line.
8
Press the ZOOM TELE key, the message “ZOOM TELE”
should be shown on the LCD and the Data “STX SK 24
ETX” is transmitted to the RS-485 line.
8
Press the ZOOM WIDE key, the message “ZOOM WIDE”
should be shown on the LCD and the Data “STX SK 25
ETX” is transmitted to the RS-485 line.
8
Press the FOCUS NEAR key, the message “FOCUS
NEAR” should be shown on the LCD and the Data “STX
SK 26 ETX” is transmitted to the RS-485 line.
8
Press the FOCUS FAR key, the message “FOCUS FAR”
should be shown on the LCD and the Data “STX SK 27
ETX” is transmitted to the RS-485 line.
8
Press the Joystick Controller to UP, the message “JOY
UP” should be shown on the LCD and the Data “STX SK
28 ETX” is transmitted to the RS-485 line.
8
Press the Joystick Controller to RIGHT, the message
“JOY RIGHT” should be shown on the LCD and the Data
“STX SK 29 ETX” is transmitted to the RS-485 line.
8
Press the Joystick Controller to DOWN, the message
“JOY DOWN” should be shown on the LCD and the Data
“STX SK 30 ETX” is transmitted to the RS-485 line.
8
Press the Joystick Controller to LEFT, the message “JOY
LEFT” should be shown on the LCD and the Data “STX
SK 31 ETX” is transmitted to the RS-485 line.
8
Press the Function key F1, the message “F1” should be
shown on the LCD and the Data “STX SK 32 ETX” is
transmitted to the RS-485 line.
8
Press the Function key F2, the message “F2” should be
shown on the LCD and the Data “STX SK 33 ETX” is
transmitted to the RS-485 line.
8
Press the Function key F3, the message “F3” should be
shown on the LCD and the Data “STX SK 34 ETX” is
transmitted to the RS-485 line.
8
Press the Function key F4, the message “F4” should be
shown on the LCD and the Data “STX SK 35 ETX” is
transmitted to the RS-485 line.
8
Press the Cursor UP Arrow key, the message “
M
” should
be shown on the LCD and the Data “STX SK 36 ETX” is
transmitted to the RS-485 line.
8
Press the Cursor RIGHT key Arrow, the message “
B
”
should be shown on the LCD and the Data “STX SK 37
ETX” is transmitted to the RS-485 line.
8
Press the Cursor DOWN Arrow key, the message “
<
”
should be shown on the LCD and the Data “STX SK 38
ETX” is transmitted to the RS-485 line.
8
Press the Cursor LEFT Arrow key, the message “
N
”
should be shown on the LCD and the Data “STX SK 39
ETX” is transmitted to the RS-485 line.
8
Set the Rotary SW to 0, the message “ROTARYSW-0”
should be shown on the LCD and the Data “STX SK 48
ETX” is transmitted to the RS-485 line.
8
Set the Rotary SW to 1, the message “ROTARYSW-1”
should be shown on the LCD and the Data “STX SK 49
ETX” is transmitted to the RS-485 line.
8
Set the Rotary SW to 2, the message “ROTARYSW-2”
should be shown on the LCD and the Data “STX SK 50
ETX” is transmitted to the RS-485 line.
8
Set the Rotary SW to 3, the message “ROTARYSW-3”
should be shown on the LCD and the Data “STX SK 51
ETX” is transmitted to the RS-485 line.
Click on the first or last page to see other WJ-SX550 service manuals if exist.