Read Panasonic WJ-HD500B Service Manual online
– 1-4 –
$8
Copy Port (COPY)
For connecting the optional DVD Extension Unit.
For connecting the optional DVD Extension Unit.
$9
Mode Selector (MODE)
Selects data termination for PS
Selects data termination for PS
•
Data system expansion.
%0
Data Port (DATA)
Exchanges control data with the external device with
PS
Exchanges control data with the external device with
PS
•
Data (Panasonic Security Data) mode.
%1
Remote Port [REMOTE (WV-CU50)]
This port is provided for controlling the Disk Recorder
with the optional WV-CU50 Remote Controller.
To connect to the controller, use a 6-conductor modular
cable supplied as an accessory with the controller.
This port is provided for controlling the Disk Recorder
with the optional WV-CU50 Remote Controller.
To connect to the controller, use a 6-conductor modular
cable supplied as an accessory with the controller.
%2
Gen-lock Output Connector (GEN-LOCK OUT)
This connector is used to connect an external system for
synchronization.
To record images at maximum recording rate, for exam-
ple 50 fps, connect this output to the cameras to syn-
chronize the system.
This connector is used to connect an external system for
synchronization.
To record images at maximum recording rate, for exam-
ple 50 fps, connect this output to the cameras to syn-
chronize the system.
%3
Serial Port (SERIAL)
For connecting a Personal Computer.
For connecting a Personal Computer.
%4
Signal Ground Terminal (SIGNAL GND)
%5
10/100BASE-T Port (Optional)
An optional Network Board can be installed in the Disk
Recorder.
This port is used to exchange control data with Ethernet
via an Ethernet Hub.
An optional Network Board can be installed in the Disk
Recorder.
This port is used to exchange control data with Ethernet
via an Ethernet Hub.
%6
Cooling Fan
Prevents the temperature of the Recorder from rising,
Do not block the ventilation opening on the cover.
Prevents the temperature of the Recorder from rising,
Do not block the ventilation opening on the cover.
%7
AC Inlet Socket (AC IN)
Plug the power cord (supplied as a standard accessory)
into this socket and connect it to an AC outlet.
Plug the power cord (supplied as a standard accessory)
into this socket and connect it to an AC outlet.
%8
Power Switch (POWER ON/OFF)
This switch turns the power of the Disk Recorder on and
off.
This switch turns the power of the Disk Recorder on and
off.
%9
Video Output Connectors (VIDEO OUT 1 - 16)
The video signal connected to the Video Input
Connector (VIDEO IN) is looped through these connec-
tors with an automatic 75
The video signal connected to the Video Input
Connector (VIDEO IN) is looped through these connec-
tors with an automatic 75
Ω
termination.
^0
Video Input Connectors (VIDEO IN 1 - 16)
These connectors accept either a colour or B/W com-
posite video signal from the camera.
These connectors accept either a colour or B/W com-
posite video signal from the camera.
Pin
No.
Designation
1
2
3
4
5
6
7
8
9
10
11
12
13
Alarm Input 1
Alarm Input 2
Alarm Input 3
Alarm Input 4
Sequence Timing Input
Alarm Reset Output
Ground
Alarm Recover Input
Alarm Output
Alarm Input 10
Alarm Input 11
Alarm Input 12
Alarm Input 13
Pin
No.
14
15
16
17
18
19
20
21
22
23
24
25
Designation
Ground
Alarm Input 5
Alarm Input 6
Alarm Input 7
Alarm Input 8
Alarm Input 9
Ground
+5 V Output (0.2 A)
Recording Timer Select
Input
Input
Alarm Input 14
Alarm Input 15
Alarm Input 16
Click on the first or last page to see other WJ-HD500B service manuals if exist.