Read Panasonic GP-US522HAE / GP-US532HAE / GP-US522CUAE Service Manual Simplified online
– 5 –
ADJUSTMENT PROCEDURE
5. Adjustment Procedure
■
Blemish Concealment and Correction
Test Point:
Video Output Connector 1 Rear Panel
Adjust:
Page Button (PAGE)
Front Panel
Item Button (ITEM/AWC)
Front Panel
Left Button (
4
)
Front Panel
Right Button (
5
)
Front Panel
(a) Set the Camera/Colour Bar Selector (CAM/BAR) to the
CAM position.
(b) Turn the power ON while pressing the Item Button
(ITEM/AWC) and Right Button (
5
) simultaneously and
enter the Scan Mode as shown in Fig. 5-1.
Fig. 5-1
Note: All the data is initialized by pressing the Left Button
(
4
) and Right Button (
5
) simultaneously for over 1
second.
(c) Move the blinking Memory Number by the Page Button
(Down) and the Item Button (Up) to the associated
Memory Number to be compensated.
(d) Set the Camera/Colour Bar Selector (CAM/BAR) to the
BAR position, and the Cross type Cursor is displayed as
shown in Fig. 5-2.
Fig. 5-2
Note: The Cursors are not displayed when the vertical and
horizontal addresses are (0000, 0000) because they
are out of the effective picture area.
(e) Set the Electronic Light Control ON/OFF Selector (ELC
ON/OFF) to either ON or OFF so that the largest Blemish
Level decreases.
(f) Move the Cursor Position by the Page Button (Up), Item
Button (Down), Left Button (Left) and Right Button
(Right) to the Blemish position to be compensated, the
Blemish is eliminated.
(g) Set the Scene File Selector (SCENE) to either 1 or 2 so
that the Blemish Level is minimized.
(h) After confirming the Blemish is compensated, set the
Camera/Colour Bar Selector (CAM/BAR) to the CAM
position to save the status and return to the Scan Mode.
(i) For the next Blemish, select the next Memory Number by
the Page Button (Down) and the Item Button (Up) and
set the Camera/Colour Bar Selector (CAM/BAR) to the
BAR position, and repeat above steps ( item (f) – (h) ) to
eliminate the next Blemish.
(j) Up to eight Blemishes can be compensated.
(k) After completing the Blemish compensation, save the
data to EEPROM by pressing the Page Button (PAGE)
and Item Button (ITEM/AWC) simultaneously for over
one second.
(l) Turn the power OFF.
❋
For rest of adjustments
Refer to "5. Adjustment Procedure" on the
page 15 - 22 of the GP-US522HE/GP-
US532HE/GP-US522CUE Service Manual.
Refer to "5. Adjustment Procedure" on the
page 15 - 22 of the GP-US522HE/GP-
US532HE/GP-US522CUE Service Manual.
SCAN
MODE
0
0 0 0 0
0 0 0 0
1
0 0 0 0
0 0 0 0
2
0 0 0 0
0 0 0 0
3
0 0 0 0
0 0 0 0
4
0 0 0 0
0 0 0 0
5
0 0 0 0
0 0 0 0
6
0 0 0 0
0 0 0 0
7
0 0 0 0
0 0 0 0
Address
Memory Number
blinking Memory Number
H Cursor
V Cursor
Click on the first or last page to see other GP-US522HAE / GP-US532HAE / GP-US522CUAE service manuals if exist.