Read Panasonic BM-ET500 Service Manual online
– 3 –
(7).Referring to Fig. 6, remove the Screw Nut (M5) (with 8
mm (0.03 in.) Socket Driver) that secure the BM-ET500
and remove the BM-ET500 from the Mounting Bracket
while releasing the four hooks of the Mounting Bracket .
and remove the BM-ET500 from the Mounting Bracket
while releasing the four hooks of the Mounting Bracket .
Screw Nut (M5)
Video Output Cable and
Power Cable.
(from the Control Unit)
Power Cable.
(from the Control Unit)
Hooks
Mounting Bracket
BM-ET500
Fig. 6
Fig. 7
(8).Referring to Fig. 7, remove one screw that secure the
Shipping Lock and remove the Shipping Lock.
(9).Referring to Fig. 7, remove six screws that secure the
Rear Panel and remove the Rear Panel from the BM-
ET500 while removing the Shipping Lock from the Rear
Panel.
ET500 while removing the Shipping Lock from the Rear
Panel.
(10). Referring to Fig. 8, remove six screws that secure the
Camera Mechanical Ass'y and remove the Camera
Mechanical Ass'y from the BM-ET500 while removing
the Shipping Lock from the Camera Mechanical Ass'y.
Mechanical Ass'y from the BM-ET500 while removing
the Shipping Lock from the Camera Mechanical Ass'y.
BM-ET500
Remove six
screws.
screws.
Camera
Mechanical
Ass'y
Mechanical
Ass'y
Remove the Shipping
Lock from this hole.
Lock from this hole.
Shipping Lock
Fig. 8
BM-ET500
Remove the
Shipping Lock
from this hole.
Shipping Lock
from this hole.
Rear Panel
Remove six screws.
Remove one screw.
Shipping Lock
(11). Referring to Fig. 9, disconnect the connector CN222 on
the Printed Circuit Board (Camera Main Board) of the
Camera Mechanical Ass'y and remove the Wire Ass'y
(5-pin).
Camera Mechanical Ass'y and remove the Wire Ass'y
(5-pin).
Camera Mechanical Ass'y
CN222
Printed Circuit Board
(Camera Main Board)
(Camera Main Board)
Fig. 9
Wire Ass'y
(5-pin)
(5-pin)
Click on the first or last page to see other BM-ET500 service manuals if exist.