BL-C210CE, BL-C210E - Panasonic Video Monitoring Service Manual (repair manual). Page 11

11

Operating Power Supply: 3.3 V (for I/O) 1.2 V (for Core)
Package: 433 pin Ball BGA
Outline of Operation: This LSI encodes a picture signal input from a camera into a JPEG, an MPEG4 or an H.264 format and an
audio signal input from a microphone into a AAC-LC format, and then it distributes the data to the terminal on the IPV4 or IPV6
network using the network server function achieved by processing the software of a built-in processor.
CMOS sensor (IC401), Audio codec (IC702) and Real Time Clock IC (IC902) are accessed by I2C I/F. 
Ethernet PHY (IC301) is accessed by MII (Media Independent Interface) I/F.

Operating Power Supply: +3.3 V
Package: 18 pin Ball BGA
Capacity: 64 Mbit
Access Time: 70 ns
Outline of Operation: Stores programs for CPU operation, MAC address and customer setup data. Version up is available from
Ethernet I/F.

Operating Power Supply: 1.8 V
Package: 84 pin Ball BGA
Capacity: 512 Mbit
Outline of Operation: Stores the memory for CPU work and temporary saved images.

Reset voltage: 2.9 V 
Package: 5 pin SOT-23-5
Outline of Operation: When 3.3V power starts up, it emits about 50ms reset pulse after detecting 2.9V.

Outline of Operation: It is possible to bring back the setting value of a Network Camera to a factory-shipments state, when you
push.