Read Panasonic BL-C1CE / BL-C1E Service Manual online
17
BL-C1CE / BL-C1E
Note:
• If the indicator does not light green, check the connection.
• If more than 20 minutes have passed since the camera was turned on, the camera cannot be set up from the Setup Program. In
• If more than 20 minutes have passed since the camera was turned on, the camera cannot be set up from the Setup Program. In
this situation, disconnect the AC adaptor from the outlet, and reconnect it again.
• The Setup Program may not list any cameras due to your firewall or antivirus software settings on your PC. If you cannot disable
your firewall or antivirus software, you can set up the camera by entering the camera MAC address on the following window. The
camera's MAC address can be found on the label affixed to the rear of each camera.
camera's MAC address can be found on the label affixed to the rear of each camera.
4. Click [Automatic setup (Local Access Only)].
5. Enter the user name and password, and click [Save].
Note:
Make a note of the user name and password.
6. The Enter Network Password window is displayed. Enter the user name and password that were set, and click [OK].
Click on the first or last page to see other BL-C1CE / BL-C1E service manuals if exist.