Read Panasonic BL-C1CE / BL-C1E Service Manual online
13
BL-C1CE / BL-C1E
5 Location of Controls and Components
5.1.
Front View
Indicator Display*1
*1) The information below varies depending on the indicator settings .
*2) The indicator turns orange if the camera is not connected to the LAN.
*3) The indicator blinks orange if the camera is not connected to the LAN.
*2) The indicator turns orange if the camera is not connected to the LAN.
*3) The indicator blinks orange if the camera is not connected to the LAN.
5.2.
Rear View
Power on
Not on the LAN
Orange
→ Orange blinking
On the LAN
Orange
→ Orange and green blinking → Green
Normal Operation *2
Green
Automatic
Setup
Setup
Setting
Green blinking
Finished seting
Green
Using DHCP
Getting IP address *3
Orange blinking
→ Green blinking
Got IP address
Green
Updating Firmware
Orange blinking
FACTORY DEFAULT RESET button pressed
Orange blinking
→turning off (about 5 seconds)
→The status when turned on
(The camera is reset to factory default status after 1 minute.)
(The camera is reset to factory default status after 1 minute.)
UPnP Failure
Orange blinking (About a 2-second interval)
Internal Failure
Red binking
Click on the first or last page to see other BL-C1CE / BL-C1E service manuals if exist.