Read Panasonic CX-CM8190F Service Manual online
General
Power Supply
DC 12V (11V - 16V)
Test Voltage 14.4V
Negative Ground
Current Consumption
Less than 1A (Illumination ON)
CD Player
Total Harmonic Distortion
Less than 0.2%
Signal to Noise Ratio
More than 65dB (IHF-A)
Channel Separation
More than 52dB (IHF-A)
Wow and Flutter
Below measurable limits
Dimensions** (W×H×D)
178 × 56.5 × 156.3 (mm)
Weight**
1.52kg
MAZDA
CX-CM8190F
CX-CM8190F
CD Changer [Upper Module of MASIC]
PART No. : LD51 79 EG0
VEHICLE
: MPV
DESTINATION : North America, Europe
PRODUCED AFTER : Nov.,2001
* Specifications and the design are subject to possible modification
without notice due to improvements.
** Dimensions and Weight shown are approximate.
Above specifications comply with EIA standards
AUTOMOTIVE ELECTRONICS
Specifications*
ORDER No.1105
I0
1
FEATUERS
2
2
LASER PRODUCTS
2
3
SYSTEM BLOCK DIAGRAM
3
4
CD DISC CENTERING ALIGNMENT
4
5
NAME OF FUNCTION OF EACH PARTS
5
6
WIRING CONNECTION
6
7
BLOCK DIAGRAM
7
8
TERMINALS DESCRIPTION
9
1 FEATUERS
•
•
•
•
6-disc CD changer (in dash board).
•
•
•
•
Upper Module of MASIC
9
PACKAGE AND IC BLOCK DIAGRAM
11
10 REPLACEMENT PARTS LIST
13
11 EXPLODED VIEW (Unit)
15
12 CD CHANGER PARTS LIST
16
13 EXPLODED VIEW (CD Deck)
19
14 WIRING DIAGRAM
22
15 SCHEMATIC DIAGRAM
25
2 LASER PRODUCTS
CONTENTS
Page
Page
2
MAZDA / CX-CM8190F
3 SYSTEM BLOCK DIAGRAM
3
MAZDA / CX-CM8190F
4 CD DISC CENTERING ALIGNMENT
•
•
•
•
This adjustment is for assuring that compact discs will be placed in the center of the turntable.
<Adjustment Condition / Jig>
•
•
•
•
Power Supply Voltage : 13.2V
•
•
•
•
Test Disc : TCD-784M
<Adjustment Procedures>
1. Attach the adjusting screw to the upper chassis (See Figure 1.).
2. Insert the test CD (TCD-784M) into the disc No.1 position and play it.
3. After checking whether the disc is centered on the turntable, turn the adjusting screw unit it is in the center.
<Check Items>
•
•
•
•
Check that the disc is correctly centered.
•
•
•
•
Check that the disc is securely clamped.
•
•
•
•
Check that no abnormal noise is produced when clamping the disc.
[Directions of Turning the Adjusting Screw]
•
•
•
•
CD stops before its proper position : Turn the screw counterclockwise.
•
•
•
•
CD overruns : Turn the screw clockwise.
4. After the adjustment, lock the screw.
4
MAZDA / CX-CM8190F