Read Panasonic SV-SD100VEB / SV-SD100VEG / SV-SD100VGC / SV-SD100VGK / SV-SD100VGN / SV-SD100VPP Service Manual online
Error Code
Error Description
Cause
Countermeasure
100B
DIR entry reading error (secure)
Hardware/software
Replace the SD-card with another card. If the error
persists, check the main PCB´s IC4 and peripheral
circuitry.
persists, check the main PCB´s IC4 and peripheral
circuitry.
100C
Authentication error
Data
Replace the SD-card with another card. If the error
persists, check the main PCB´s IC4 and peripheral
circuitry.
persists, check the main PCB´s IC4 and peripheral
circuitry.
100D
MBR logic error (secure)
Data
Replace with an SD-card that contains a recording.
100E
FAT logic error (secure)
Data
Replace with an SD-card that contains a recording.
1010
No SD AUDIO directory (secure)
Data
Replace with an SD-card that contains a recording.
1011
No KEY file
Data
Replace with an SD-card that contains a recording.
1012
No PLM file
Data
Replace with an SD-card that contains a recording.
1013
No TKM file
Data
Replace with an SD-card that contains a recording.
1015
NAVI level reading error
Hardware/software
Either format the SD-card, or replace it.
1016
PLM information acquisition failure (no information
to acquire)
to acquire)
Data
Either format the SD-card, or replace it.
1017
TKM information acquisition failure (no information
to acquire)
to acquire)
Data
Either format the SD-card, or replace it.
1018
PLM file size is 0
Data
Either format the SD-card, or replace it.
1019
TKM file size is 0
Data
Either format the SD-card, or replace it.
101A
AOB file size is 0
Data
Either format the SD-card, or replace it.
101B
Stream transmission error
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
101C
Stream transmission stop error
Hardware/software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
101D
Secure Read NG
Hardware/software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
101F
FSI internal error
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
1020
Message transmission failure
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
1021
PL table creation failure
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
1022
TKI table creation failure
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
1023
AOB table creation failure
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
1050
FDC reading error (Normal)
Hardware/software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
1051
FDC reading error (Secure)
Hardware/software
Replace the SD-card with another card. If the error
persists, check the main PCB´s IC4 and peripheral
circuitry.
persists, check the main PCB´s IC4 and peripheral
circuitry.
1053
Mount error (FSI_RW_FATAL)
Data
Format the SD-card at the audio player.
1054
No Card (for Mount)
Data
Insert an SD-card.
1055
CARD LOCK status
Data
Release the SD-card lock
8003
Playback-disabled stream
Data
Either format the SD-card, or replace it.
8010
Dummy stream transmission failure
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
8030
CODEC specifications violation
Data
Either format the SD-card, or replace it.
8066
Request for other task failed
software
Try changing the SD-card, and turning the power
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
OFF and ON. If the error persists, try removing the
battery and installing it again. If the error still
persists, perform a device check.
18
SV-SD100VEB / SV-SD100VEG / SV-SD100VGC / SV-SD100VGK / SV-SD100VGN / SV-SD100VPP
Click on the first or last page to see other SV-SD100VEB / SV-SD100VEG / SV-SD100VGC / SV-SD100VGK / SV-SD100VGN / SV-SD100VPP service manuals if exist.