Read Panasonic SV-SD100VEB / SV-SD100VEG / SV-SD100VGC / SV-SD100VGK / SV-SD100VGN / SV-SD100VPP Service Manual online
8.14. SERVICE 12: FM Recording
Check
Performs "FM radio reception, repeats the "SD-card formatting,
full recording (recording until card´s capacity is completely
used), and playback" procedure, and checks for FM recording
errors.
1. Execute the "8.3 SERVICE 1: EL Display Mode Switching"
full recording (recording until card´s capacity is completely
used), and playback" procedure, and checks for FM recording
errors.
1. Execute the "8.3 SERVICE 1: EL Display Mode Switching"
procedure so that EL is always ON.
2. Execute menus up to 6 as described in section 8.2
(Entering The Service Mode).
3. Remove the service mode SD-card from the audio player.
Note: The SD-card will be formatted at the SERVICE 12
menu. Therefore, be sure to remove the service mode
SD-card from the audio player.
menu. Therefore, be sure to remove the service mode
SD-card from the audio player.
4. Insert the recording check SD-card into the audio player.
5. Execute the SERVICE 12 menu as described in section 1.2
5. Execute the SERVICE 12 menu as described in section 1.2
(Entering The Service Mode).
· The reception frequency selection screen (Fig.S16)
· The reception frequency selection screen (Fig.S16)
displays.
6. Select the reception frequency.
FWD-Skip
Tuning UP
REW-Skip
Tuning DOWN
7. Press the [Play/Stop] button to begin FM recording.
· The FM recording error check screen (recording time:
Fig.S17, playback time: Fig.S18) displays, then the
"repeated SD-card formatting, full recording (recording
until card´s capacity is completely used), and playback"
procedure begins.
"repeated SD-card formatting, full recording (recording
until card´s capacity is completely used), and playback"
procedure begins.
· The repeat count displays onscreen.
8. The above procedure is repeated until a recording error
occurs. Therefore, if no recording error has occurred after
approximately 2 repeats, open the battery cover to end the
procedure.
approximately 2 repeats, open the battery cover to end the
procedure.
* If a recording error occurs, recording is stopped, and an error
code (recording time: Fig.S19, playback time: Fig.S20) displays
onscreen.
For error code details, refer to section 8.16 (Error Code Table).
code (recording time: Fig.S19, playback time: Fig.S20) displays
onscreen.
For error code details, refer to section 8.16 (Error Code Table).
Fig.S16
Fig.S17
Fig.S18
Fig.S19
16
SV-SD100VEB / SV-SD100VEG / SV-SD100VGC / SV-SD100VGK / SV-SD100VGN / SV-SD100VPP
Click on the first or last page to see other SV-SD100VEB / SV-SD100VEG / SV-SD100VGC / SV-SD100VGK / SV-SD100VGN / SV-SD100VPP service manuals if exist.