Read Panasonic SH-MZ1200PP / SH-MZ1200EB / SH-MZ1200EG / SH-MZ1200EP / SH-MZ1200GN Service Manual online
5 Fader Replacement Instructions
DJ Mixer
Fader Replacement Instructions
Fader Replacement Instructions
First, remove the AC power supply cord (AC mains
lead) and follow the steps below to replace with a
new fader.
lead) and follow the steps below to replace with a
new fader.
1
Remove all five channel fader,
cross fader knobs, and the re-
placement panel
cross fader knobs, and the re-
placement panel
Remove the four plate screws on the replace-
ment panel.
ment panel.
Replacement panel
2
Remove the channel fader or
cross fader to be replaced
cross fader to be replaced
Do not let the screws fall inside the
unit.
unit.
-1 Remove the two fader fastening
screws
-2 Remove the fader
Channel fader
Turn on an angle and lift to remove.
Cross fader
Turn on an angle and lift to remove.
Turn on an angle and lift to remove.
Cross fader
Turn on an angle and lift to remove.
-3 Remove the fader cable while hold-
ing the 3 pin connector
3 pin connector
-4
Cross fader
Remove the two fastening screws, the
optical device unit, and then the cross
fader.
optical device unit, and then the cross
fader.
• Move the lever toward the center and
remove.
• Do not change the shape of the optical
device unit or the 4 pin terminal.
Lever
4 pin terminal
4 pin terminal
3
Attach the new channel fader or
cross fader
cross fader
Attach by performing the opposite of the re-
move step.
move step.
4
Attach the replacement panel and
knobs
knobs
8
SH-MZ1200PP / SH-MZ1200EB / SH-MZ1200EG / SH-MZ1200EP / SH-MZ1200GN
Click on the first or last page to see other SH-MZ1200PP / SH-MZ1200EB / SH-MZ1200EG / SH-MZ1200EP / SH-MZ1200GN service manuals if exist.