SC-EN25P, SC-EN26P, SC-EN27PC - Panasonic Audio Service Manual (repair manual). Page 17

Read Panasonic SC-EN25P / SC-EN26P / SC-EN27PC Service Manual online

10 Self Diagnostic Function
10.1. Setting of self diagnostic Function
10.1.1. Setting of self diagnostic mode
 1. To enter into self-diagnostic mode:
     ·    Press & hold key,followed by VOL+ key for more than 2 seconds.
 2. LCD will show the following display as below:
(LCD Display)
 3. Error during Test:
     ·    Press & hold
key (> 2sec) will show blinking error code. If abnormality occurs during test, error code will be
displayed.
Example:
NOTE: Refer to error code table 11.1.
10.1.2. Test Mode Checking
 1. Operation keys and all segment display check mode:
     ·    Activate the Self Diagnosis mode before performing the following steps
     ·    Press & hold REMORT CONTROL 2 key (>2 sec) will enter this mode.
     ·    When the keys of the main set is pressed, the various corresponding key functions shall light up and display that particular
function. After all the main set keys were pressed, the LCD shows the following (Including CD LED):
 2. CD lid OPEN/CLOSE aging test mode:
     ·    Press & hold
key (>5 sec) will enter this mode.
     ·    This mode counts the number of times the CD lid open/close (MAX is 65535).
     − 
− 
− 
− :
     − 
− 
− 
− :
17
SC-EN25P / SC-EN26P / SC-EN27PC
Page of 50
Display

Click on the first or last page to see other SC-EN25P / SC-EN26P / SC-EN27PC service manuals if exist.