Read Panasonic SA-MAX4000PN / SA-MAX4000PS Service Manual online
10
4 Specifications
Q
Amplifier section
RMS output power stereo mode
High Ch
350 W per channel (3
Ω
), 1 kHz, 30% THD
Mid Ch
350 W per channel (3
Ω
), 1 kHz, 30% THD
Low Ch
500 W per channel (2
Ω
), 100 Hz, 30% THD
Total RMS stereo mode power
2400 W
Q
Disc section
Disc played (8 cm or 12 cm)
CD, CD-R/RW (CD-DA, MP3*)
*MPEG-1 Layer 3, MPEG-2 Layer 3
Pick up
Pick up
Wavelength
790 nm(CD)
Q
Buetooth
®
section
Version
Bluetooth
®
2.1 + EDR
Class
Class 2
Supported profiles
A2DP, AVRCP, SPP, OPP, FTP
Operating frequency
2.4 GHz band FH-SS
Operation distance
10 m line of sight
Q
Internal memory section
Memory
Memory size
2 GB
Media file format support
MP3 (*.mp3)
Memory recording
Bit rate
128 kbps
Memory recording speed
1x, 3x max (CD only)
Recording file format
MP3 (*.mp3)
Q
Tuner section
Frequency modulation (FM)
Preset memory
30 stations
Frequency range
87.5 MHz to 108.0 MHz (100 kHz step) (For PN)
87.9 MHz to 107.9 MHz (200 kHz step) (For PN)
87.9 MHz to 107.9 MHz (200 kHz step) (For PN)
87.50 MHz to 108.00 MHz (50 kHz step) (For PS)
Antenna terminals
75
Ω
(unbalanced)
Amplitude modulation (AM)
Preset memory
15 stations
Frequency range
520 kHz to 1710 kHz (10 kHz step) (For PN)
522 kHz to 1629 kHz (9 kHz step) (For PS)
520 kHz to 1630 kHz (10 kHz step) (For PS)
Q
Terminal section
USB port
USB standard
USB 2.0 full speed
Media file format support
MP3 (*.mp3)
USB device file system
FAT12, FAT16, FAT32
USB recording
Bit rate
128 kbps
USB recording speed
1x, 3x (CD only)
Recording file format
MP3 (*.mp3)
AUX IN 1
Audio input
Pin jack
AUX IN 2
Terminal
Stereo, 3.5 mm jack
Microphone
Terminal
Mono, 6.3 mm jack
Q
General
Power supply
AC 120 V, 60 Hz (for PN)
AC 220 V to 240 V, 50/60 Hz
(for PS)
Power consumption
155 W
Dimensions (W x H x D)
492 mm x 221 mm x 421 mm
Mass
5.8 kg
Operating temperature range
0
°
C to +40
°
C
Operating humidity range
35% to 80% RH
(no condensation)
Power consumption in standby
mode (approximate)
mode (approximate)
0.4 W
Power consumption in standby
mode (approximate)
(With “BLUETOOTH STANDBY”
set to “ON”)
mode (approximate)
(With “BLUETOOTH STANDBY”
set to “ON”)
0.5 W
Note:
1. Specifications are subject to change without notice.
Mass and dimension are approximate.
2. Total harmonic distortion is measured by the digital spec-
trum analyzer.
Q
System: SC-MAX4000PN
Main Unit: SA-MAX4000PN
Speaker System: SB-MAX4000PN
Q
System: SC-MAX4000PS
Main Unit: SA-MAX4000PS
Speaker System: SB-MAX4000PS
Click on the first or last page to see other SA-MAX4000PN / SA-MAX4000PS service manuals if exist.