Read Panasonic WH-MXC16G9E8 Service Manual online
16
User
Weekly timer setting
Promotes energy saving by allowing you to set up to 6
programmes in any given day.
Indicates the next timer operation
programme
Day to be selected
Indicates the next timer
operation day
Programme number in a day
OFF Timer
ON Timer
Lights up if Timer operation is selected
1 Press
to enter the timer setting mode.
2 Press
or
to select your desired day.
3 Press
to confirm your selection.
4
s
s
e
r
p
,
g
n
i
k
n
il
b
e
b
ll
i
w
”
1
“
to set
programme 1.
5 Press
to select ON or OFF timer.
6 Press
or
to select your desired time.
You can set
,
,
and the Water
Temperature Thermo Shift setting.
7 Press
to confirm programme 1. The selected
day will be highlighted with ▼.
• After 2 seconds, the display will move to the next
• After 2 seconds, the display will move to the next
programme. Repeat steps 4 to 7 to set
programmes 2 to 6.
• During timer setup, if no button is pressed within
30 seconds, or if the
is pressed, the setting at
that moment is confirmed and timer setup is ended.
To check current timer programme
1 Press
to enter timer mode and press
to enter day setting.
2 Press
or
until your desired day is shown,
press
to confirm your selection.
3 Press
or
to check the set programmes.
To modify current timer programme
or add new timer programme
or add new timer programme
1
s
p
e
t
s
m
r
o
f
r
e
P
1 to 7 of “Weekly timer
setting” to modify existing timer programme, or
add any timer programme.
add any timer programme.
To cancel current timer programme
1 Press
to enter day.
2 Press
or
until your desired day is shown,
press
to enter programme setting.
3 Press
or
until your desired programme is
shown.
Press
Press
to cancel the programme and ▼ will
disappear.
To disable/enable Weekly Timer
• To disable weekly timer setting, press
, then
press
.
• To enable previous weekly timer setting, press
,
then press
.
Dealer
Operation/settings to be done only by the authorised dealer/specialist.
User
Operation/settings to be done by the authorised dealer/specialist or user.
■
Note:
• You may set the timer for each day of the week (Monday to Sunday) with 6 programmes per day.
• When the system is switched on by the timer, it will use the previously set temperature to control the water outlet
• When the system is switched on by the timer, it will use the previously set temperature to control the water outlet
temperature.
• The same timer programme cannot be set on the same day.
• You may also select 2 or more days with the same timer setting.
• You may also select 2 or more days with the same timer setting.
Click on the first or last page to see other WH-MXC16G9E8 service manuals if exist.