Read Panasonic CS-PA7KKD / CS-PA9KKD / CS-PA12KKD / CS-PA16KKD / CU-PA7KKD / CU-PA9KKD / CU-PA12KKD / CU-PA16KKD Service Manual online
31
12. Servicing
Mode
12.1 Auto Off/On Button
1
AUTO OPERATION MODE
Auto Operation will be activated immediately once the Auto OFF/ON button is pressed. This operation can be
used to operate air conditioner with limited function if remote control is misplaced or malfunction.
Auto Operation will be activated immediately once the Auto OFF/ON button is pressed. This operation can be
used to operate air conditioner with limited function if remote control is misplaced or malfunction.
2
TEST RUN OPERATION (FOR PUMP DOWN/SERVICING PURPOSE)
The Test Run Operation will be activated if the Auto OFF/ON button is pressed continuously for more than 5
seconds. A “beep” sound will be heard at the fifth seconds, in order to identify the starting of this operation.
The Test Run Operation will be activated if the Auto OFF/ON button is pressed continuously for more than 5
seconds. A “beep” sound will be heard at the fifth seconds, in order to identify the starting of this operation.
3
REMOTE CONTROL RECEIVING SOUND OFF/ON MODE
z
To switch OFF the remote control receiving sound, press and hold "AUTO OFF/ON"
button for approximately 10 seconds until you hear 2 “beep” sounds. Release you hand
and then press this button again for 10 seconds until you hear 2 “beep” sounds again,
setting complete.
button for approximately 10 seconds until you hear 2 “beep” sounds. Release you hand
and then press this button again for 10 seconds until you hear 2 “beep” sounds again,
setting complete.
z
To switch ON the sounds, repeat above operation.
4
Random Auto Restart Function OFF/ON
z
Factory setting is ON.
z
To close this function, press and hold “AUTO OFF/ON” button for approximately 15
seconds until you hear 3 “beep” sounds. Release you hand and then press this button
again for 15 seconds until you hear 3 “beep” sounds again, setting complete.
seconds until you hear 3 “beep” sounds. Release you hand and then press this button
again for 15 seconds until you hear 3 “beep” sounds again, setting complete.
z
To recover this function, repeat above operation.
12.2 Remote Control Button
12.2.1 Mode selecting button
z
AUTO, HEAT, COOL, DRY can be selected by pressing “MODE” button.
12.2.2
Temperature adjusting button
Temperature adjusting range is between 16 ℃~30 ℃
12.2.3
Fan speed button
There are 3 speed levels other than AUTO can be selected. The display on the remote controller changes as follows by pressing
the AIR SWING button.
the AIR SWING button.
12.2.4
AIR SWING button
To adjust vertical airflow directions by pressing AIR SWING button (5 options and AUTO)
Auto Operation
Test Run Operation
(Forced Cooling Operation)
Remote Control
Receiving Sound
OFF/ON
Random Auto Restart
OFF/ON
5 sec
10 sec
15 sec
ON
Beep
Beep x 2
Beep x 3
Click on the first or last page to see other CS-PA7KKD / CS-PA9KKD / CS-PA12KKD / CS-PA16KKD / CU-PA7KKD / CU-PA9KKD / CU-PA12KKD / CU-PA16KKD service manuals if exist.