Read Panasonic CS-MC95KE / CS-MC125KE / CS-MC76KE / CS-MC126KE / CU-MC145KE / CU-MC185KE / CU-MC205KE / CU-MC245KE / CU-MC196KE Service Manual online
•
Inspection points for the Indoor Electronic Controller
1. The Electronic Controller, a signal Receiver and an
Indicator () can be seen by the below steps:
−
Remove the 2 caps and 2 screws at the bottom of
the front grille. ()
the front grille. ()
−
Remove the front grille by releasing the 2 hooks at
the top of the front grille. ()
the top of the front grille. ()
−
Remove the control board cover by releasing the 2
tabs at left, 1 tab on top and 2 more tabs at right side
of the control board cover. ()
tabs at left, 1 tab on top and 2 more tabs at right side
of the control board cover. ()
2. To remove the Electronic Controller, release the hook
that holding the electronic controller. ()
•
Indoor Fan Motor removal procedure:-
1. Remove the control board by:-
−
Releasing CN-C (GRN) connector. ()
−
Releasing CN-FM (GRN) connector. ()
−
Releasing CN-STM connector. ()
−
Remove the earth wire screw. ()
−
Release the intake air sensor. ()
−
Release the piping sensor. ()
−
Remove the right and left screws. ()
−
Then remove the control board by pressing down the
hook at the left and press up the right hook. ()
hook at the left and press up the right hook. ()
Fig. 1
Fig. 2
Fig. 3
13 Servicing Information
90
CS-MC95KE CU-MC145KE / CS-MC95KE CU-MC185KE / CS-MC95KE CU-3MC205KE / CS-MC125KE CU-MC245KE / CS-MC76KE / CS-MC126KE CU-MC196KE
Click on the first or last page to see other CS-MC95KE / CS-MC125KE / CS-MC76KE / CS-MC126KE / CU-MC145KE / CU-MC185KE / CU-MC205KE / CU-MC245KE / CU-MC196KE service manuals if exist.