CS-A28JKD, CU-A28JKD - Panasonic Air Conditioner Service Manual (repair manual). Page 34

34

• To achieve the setting temperature quickly.

• When Powerful operation is set, the setting temperature will be automatically decreased 3°C internally against the present

setting temperature (Lower temperature limit: 16°C).

• This operation automatically will be running under SHi Fan Speed (Cooling).
• Vertical Airflow Direction:-

- In “Manual” setting, the vane will automatically shift down 10° lower than previous setting.
- In “Auto” setting, the vane will automatically swing up and down. However the lower limit will be shifted 10° downward.

• When Powerful operation is set, the setting temperature will be automatically increased 3°C against the present setting

temperature (Higher temperature: 30°C).

• The Fan Speed will shift as shown below:

• Vertical Airflow Direction:-

- In “Manual” setting, the vane will automatically shift down 5° lower than previous setting.
- In “Auto” setting, the vane will automatically shift between upper and lower limit depending on the intake air temperature as

Heating Mode, Airflow Direction Auto-Control. However the upper and lower limit will be shifted 5° downward.

• Powerful operation stops when:-

- Powerful operation has operate for 15 minutes.
- Powerful button is pressed again.
- Quiet button is pressed
- Stopped by OFF/ON operation button.
- Timer OFF activates.
- Operating mode is changed.