Read Panasonic CS-A24BD / CS-A28BD / CS-A34BD / CS-A43BD / CS-A50BD / CU-A24BB / CU-A28BB / CU-A34BB / CU-A43BB / CU-A50BB / CU-C24BB / CU-C28BB / CU-C34BB / CU-C43BB / CU-C50BB Service Manual online
2.1. Variety of excellent features
2.1.1. Compact design, height 27 cm
•
The height has been reduced to 27 cm (for 2.5HP to
6.0HP), the equipment can be installed in limited spaces.
6.0HP), the equipment can be installed in limited spaces.
2.1.2. Versatile installation
•
The indoor unit is designed in order that air will also enter
from below, for easier installation under different conditions.
from below, for easier installation under different conditions.
•
The equipment has two drain outlets on the right and left
side for adoption to the installation conditions in the
building.
side for adoption to the installation conditions in the
building.
2.1.3. Easy maintenance
•
Equipped with a filter as standard. The filter can be
removed in three directions for easier maintenance.
removed in three directions for easier maintenance.
2.1.4. Static pressure selection
•
The static pressure is selectable; 5mmAq or 7mmAq. The
static pressure can be selected according to the condition
of the duct.
static pressure can be selected according to the condition
of the duct.
2.1.5. Quiet operation
•
The sound level is as low as 40db (A) for 2.5 HP and 3.0
HP. The models is ideal for installation in offices, shop and
houses where quiet operation is important.
HP. The models is ideal for installation in offices, shop and
houses where quiet operation is important.
2.1.6. Auto fan mode operation
•
Auto fan mode is added to existing modes Hi, Me and Lo.
It aotomatically adjusts the fan speed according to the
indoor temperature.
It aotomatically adjusts the fan speed according to the
indoor temperature.
2.1.7. Dry mode function
•
Dry mode can make a comfortable indoor environment
during wet season.
during wet season.
2.1.8. Automatic changeover function
(heat pump models)
•
The unit automatically switches between cooling and
heating in accordance with operating load in order to
maintain a confortable indoor temperature.
heating in accordance with operating load in order to
maintain a confortable indoor temperature.
2.1.9. Common design for Indoor unit
and Remote Control
•
The indoor unit and the wire remote control are design as a
common specification between Cooling only and Heat
Pump models.
common specification between Cooling only and Heat
Pump models.
2.1.10. Wired Remote Control
•
The new design includes an easily -visible red pilot lamp.
The power can be turned on and off at a single touch,
without opening the cover.
The power can be turned on and off at a single touch,
without opening the cover.
•
A built-in thermistor, allowing indoor temperature detection
in accordance with indoor conditions by switching with main
unit thermistor.
in accordance with indoor conditions by switching with main
unit thermistor.
•
Twin non-polar wires make installation work easy, (10 m
cable supplied as accessories)
cable supplied as accessories)
2 FEATURES
4
HIDE AWAY TYPE
Click on the first or last page to see other CS-A24BD / CS-A28BD / CS-A34BD / CS-A43BD / CS-A50BD / CU-A24BB / CU-A28BB / CU-A34BB / CU-A43BB / CU-A50BB / CU-C24BB / CU-C28BB / CU-C34BB / CU-C43BB / CU-C50BB service manuals if exist.