Read LG WT-80PV Service Manual online
(WASHING CONDITION INDICATOR)
(START/PAUSE)
● The program can only be executed when it is under the "STANDARD" or
"INTELLIGENT WASH" mode. It cannot be perceived if "WASH", "RINSE"
or "SPIN" is selected.
or "SPIN" is selected.
● During sensor, the indicator blinks in the order of green-orange-red. When
sensor is over, a specific color will be displayed according to the following
detecting result.
detecting result.
1. If the washing condition(amount of detergent, water temperature and water
quality) is superior to standard condition, the micro-processor will
automatically reduce washing time/strength and the indicator will turn red.。
automatically reduce washing time/strength and the indicator will turn red.。
2. If the washing condition is inferior to standard condition, Micro-processor will
automatically improve washing time/strength and the indicator will turn
orange.
orange.
3. If the washing condition is standard, the program remains unchange and
indicator turns green.
● Use to start or pause the
washing process。
● Repeats start and pause
by pushing the button.
(AUTO OFF)
● Use to turn the power on or off。
● The power goes off
automatically about 10
seconds after the wash is
finished or 10 miniutes under
PAUSE state。
SPIN)
DELAY
(PROGRAM)
●Use to adjust spinning time.
●Spinning time can be adjusted
●Spinning time can be adjusted
manually according to requirements
and the time is increasing with
certain sequence as the button is
pushed.
and the time is increasing with
certain sequence as the button is
pushed.
●Press "START/PAUSE" button before
adjusting the "SPIN" program.
● Use to set a delayed finishing time
before a leave to avoid wrinkling。
● The following settings are indicated as
the button is pushed
3->4->5->….11->12->14->16…46->
48->3 HOUR
3->4->5->….11->12->14->16…46->
48->3 HOUR
●Use for selecting wash program 。
● This button allows you to select 8
● This button allows you to select 8
different programs for different kinds
of laundry and dirtiness 。 Program
selections light up in sequence as
follows:
FUZZY(NORMAL)→POWER
WASH→QUICK
WASH→WOOL→INTELLIGENT
WASH→SILENT→CASUAL
WASH→TUB
CLEAN→FUZZY(NORMAL)]
of laundry and dirtiness 。 Program
selections light up in sequence as
follows:
FUZZY(NORMAL)→POWER
WASH→QUICK
WASH→WOOL→INTELLIGENT
WASH→SILENT→CASUAL
WASH→TUB
CLEAN→FUZZY(NORMAL)]
● To cancel delay time, turn the power
switch off。
4. Sensor sensitivity will decrease after long-time use. Please use "TUB CLEAN" program to clean the inner and
outer tub。
5. Even if the water level or temperature is changed during "STANDARD" program, the sensor is still working.
Inner optimization algorithm varies because of different models。
6. Control panel may differ according to different models.
7. "Three-level" mode is available when the water level is between 3 and 8 beside "WOOL" and "TUB CLEAN"
program.
18
Click on the first or last page to see other WT-80PV service manuals if exist.